SEAT POSITION SENSOR ASSEMBLY OVERVIEW Audi S5 I facelift

SEAT POSITION SENSOR ASSEMBLY OVERVIEW

The assembly overview shows the power Standard front seat. The seat position sensor the for the electric front sport seat is similar. Refer to SEAT POSITION SENSOR OVERVIEW .

The assembly overview shows the power Standard front seat. The trims on the sill and tunnel side of the power sport front seat are similar. Refer to SILL AND TUNNEL SIDE TRIM OVERVIEW .

The assembly overview shows the power Standard front seat. The trim retaining bracket on the sill side of the power sport front seat is similar. Refer to SILL SIDE TRIM RETAINING BRACKET OVERVIEW .

Note. The overview is based on the driver seat. The passenger seat is similar and the components are installed reversed from left to right. The illustration does not show the floor covering and the four-way lumbar support.

Scheme 107

1. Connector Station Connector routing, refer to «CONNECTOR STATION CONNECTORS»(ref-520146-S16043029342012123100000)
2. Cover For connector station Removing and installing, refer to «FRONT SEATS SERVICE POSITION, SETTING»(ref-520146-S12844149092012123100000)
3. Connector With a corrugated tube for the modular wiring routing Modular wiring routing, assembly overview, refer to «MODULAR WIRE ROUTING OVERVIEW»(ref-520146-S35395375382012123100000) Modular wiring with corrugated tube on front seat, refer to «MODULAR WIRE ROUTING WITH RIDGED TUBE ON FRONT SEAT»(ref-520146-S25852569742012123100000)
4. Storage Compartment Vehicles with special equipment Removing and installing, refer to «STORAGE COMPARTMENT»(ref-520146-S02837392252012123100000)
5. Seat Depth Adjuster Removing and installing, refer to «SEAT DEPTH ADJUSTER»(ref-520146-S07702311502012123100000)
6. Spindle Cover Quantity: 2 Clipped to the seat forward/back adjustment spindle Removing and installing, refer to «SEAT RAIL SPINDLE COVER»(ref-520146-S39143271692012123100000)
7. LATCH Child Seat Anchor Vehicles with special equipment For the front passenger seat only Removing and installing, refer to «LATCH AND TOP TETHER CHILD SEAT ANCHORS»(ref-520043-S13146115192012123100000) Check after accident «CHILD SEAT ANCHORS LATCH AND TOP TETHER, CHECKING AFTER A CRASH»(ref-520043-S08443138362012123100000)
8. Belt Latch Removing and installing, refer to «FRONT BELT LATCH»(ref-520043-S02609190182012123100000)
9. Tunnel Side Trim Removing and installing, refer to «TRIM, TUNNEL SIDE»(ref-520146-S28633413632012123100000)
10. Power Sport Front Seat Removing and installing, refer to «POWER STANDARD FRONT SEAT»(ref-520146-S36311108972012123100000) Optional equipment: Seat and backrest heating
11. Headrest Power Removing and installing, refer to «POWER HEADRESTS»(ref-520146-S42893293892012123100000)
12. Entry Assistance Assembly overview, refer to «ENTRY ASSISTANCE OVERVIEW»(ref-520146-S08466251272012123100000) Removing and installing, refer to «ENTRY ASSISTANCE HANDLE WITH BRACKET»(ref-520146-S27226461402012123100000)
13. Button With entry assist Removing and installing, refer to «ENTRY ASSISTANCE BUTTON»(ref-520146-S03098946932012123100000)
14. Sill Side Trim Removing and installing, refer to «TRIM, SILL SIDE»(ref-520146-S17654392172012123100000)
15. Cover Only behind on the seat rail, sill side Removing and installing, refer to «SEAT RAIL CAP»(ref-520146-S01871731562012123100000)
16. Bolt Quantity: 4 50 Nm
17. Cover For the seat rail Quantity: 4 Removing and installing, refer to «SEAT RAIL COVER»(ref-520146-S40235374182012123100000)
18. Actuator For backrest and headrest adjustment Actuator, removing and installing, refer to «BACKREST AND HEADREST ADJUSTMENT ACTUATOR»(ref-520146-S40615225402012123100000) Control head, removing and installing, refer to «SEAT ADJUSTMENT CONTROL HEAD»(ref-520146-S09644944742012123100000)
19. Actuator For seat adjustment Actuator, removing and installing, refer to «SEAT ADJUSTMENT CONTROL HEAD»(ref-520146-S21003635792012123100000) Control head, removing and installing, refer to «SEAT ADJUSTMENT CONTROL HEAD»(ref-520146-S09644944742012123100000)
20. Actuator For the lumbar support Lumbar Support Adjustment Switch, Removing and installing, refer to «LUMBAR SUPPORT ADJUSTMENT SWITCH»(ref-520146-S41557629062012123100000) Four-way lumbar support, removing and installing, refer to «FOUR-WAY LUMBAR SUPPORT»(ref-520146-S31541451462012123100000)

The assembly overview shows the power Standard front seat. The storage compartment on a power Sport front seat is identical. Refer to STORAGE COMPARTMENT OVERVIEW .

The assembly overview shows the power Standard front seat. The backrest adjustment motor on a power Sport front seat is identical. Refer to SWITCH UNIT OVERVIEW .

The assembly overview shows a manual Standard front seat. The torsion bar is similar for the power sport front seat. Refer to TORSION BAR ASSEMBLY OVERVIEW .

The assembly overview shows the power Standard front seat. The super sport front seat is similar. Refer to BACKREST ADJUSTMENT MOTOR, SWITCH UNIT AND BACKREST OVERVIEW .

The assembly overview shows the power Standard front seat. The electrical and electronic components of the super sport front seat are similar. Refer to ELECTRICAL AND ELECTRONIC COMPONENTS OVERVIEW .

Two different versions of the backrest may be installed.

1. Backrest frame with bracket
2. Backrest frame with support plate
3. Note the allocation of the handle with bracket and the entry assistance trim.

Note. The four-way lumbar support and seat frame are not shown in the illustration.

Scheme 108

1. Backrest Frame With bracket The bracket cannot be removed
2. Release Cable For the backrest release One piece Removing and Installing, refer to «BACKREST RELEASE CABLE»(ref-520146-S22880019712012123100000) Adjusting, refer to «BACKREST RELEASE CABLE, ADJUSTING»(ref-520146-S20779445462012123100000)
3. Mount For the backrest release cable Component of the release cable Clipped to the backrest frame
4. Rivet Quantity: 2
5. Support Plate Riveted to backrest frame Different versions, for allocation. Removing and installing, refer to «SUPPORT PLATE»(ref-520146-S39727033032012123100000)
6. Backrest Frame For versions with the support plate
7. Button With entry assist Assembly overview, refer to «ENTRY ASSISTANCE BUTTON OVERVIEW»(ref-520146-S11611403772012123100000) Removing and installing, refer to «ENTRY ASSISTANCE BUTTON»(ref-520146-S03098946932012123100000)
8. Entry Assistance Trim Removing and installing, refer to «ENTRY ASSISTANCE TRIM»(ref-520146-S35330812442012123100000)
9. Bolt Quantity: 2 3.5 Nm
10. Bolt 3.5 Nm
11. Connecting Cable For the backrest release Between the handle and bracket Engaged in the handle and bracket Removing and installing, refer to «CONNECTING CABLE»(ref-520146-S24346557412012123100000)
12. Handle With bracket (entry assistance) For the backrest release Removing and installing, refer to «ENTRY ASSISTANCE HANDLE WITH BRACKET»(ref-520146-S27226461402012123100000)
13. Bracket For the backrest release cable Quantity: 2 Component of the release cable Riveted to backrest frame
14. Bracket For the backrest release Riveted to backrest frame Removing and installing, refer to «BACKREST RELEASE BRACKET»(ref-520146-S30742801752012123100000)
15. Bolts For the backrest release Both sides Component of the backrest hinge

The assembly overview shows the power Standard front seat. The entry assistance button is similar for the super sport front seat. Refer to ENTRY ASSISTANCE BUTTON OVERVIEW .

Scheme 109

1. Seat Pan
2. Bolt Self-Locking Always replace if removed Threaded holes for screws must be cleaned, for example, with thread cutter 33 Nm
3. Backrest Removing and installing, refer to «FRONT BACKREST»(ref-520146-S35256049102012123100000)
4. Entry Assistance Button Driver side: driver entry assistance button -E358- Front passenger side: front passenger entry assistance button -E359- Removing and installing, refer to «ENTRY ASSISTANCE BUTTON»(ref-520146-S03098946932012123100000)
5. Handle With bracket (entry assistance) Removing and installing, refer to «ENTRY ASSISTANCE HANDLE WITH BRACKET»(ref-520146-S19460279182012123100000)
6. Entry Assistance Trim Removing and installing, refer to «ENTRY ASSISTANCE TRIM»(ref-520146-S35330812442012123100000)
7. Wiring Harness From the side airbag to the connector station Depending on optional equipment, there may be more wiring harnesses, such as for seat heating, lumbar support

Note. The headrest is a fixed component of the backrest upholstery and can only be removed together with the backrest upholstery. It is not possible to separate the headrest from the backrest upholstery. The backrest cover was not shown in the illustration for clarity purposes.

Scheme 110

1. Backrest Frame With bracket The bracket cannot be removed
2. Headrest Guide Without release button Removing and installing, refer to «HEADREST GUIDE»(ref-520146-S17005367862012123100000) Always installed on right side of backrest
3. Headrest With padding Headrest laid in foam in upholstery Removing and installing, refer to «BACKREST COVER AND PADDING, SUPER SPORT SEAT»(ref-520176-S41691741002012123100000)
4. Headrest Guide With release button Removing and installing, refer to «HEADREST GUIDE»(ref-520146-S17005367862012123100000) Always installed on left side of backrest
5. Backrest Frame With support plate Support plate riveted to the backrest frame Support plate, removing and installing, refer to «SUPPORT PLATE»(ref-520146-S39727033032012123100000)

The assembly overview shows a manual Standard front seat. The lumbar support adjustment switches of the super sport front seat are similar. Refer to LUMBAR SUPPORT ADJUSTMENT SWITCH OVERVIEW .

The assembly overview shows the power Standard front seat. The lumbar support curvature and forward/backward and height adjustment motors for the super sport front seat are similar. Refer to LUMBAR SUPPORT CURVATURE AND HEIGHT ADJUSTMENT MOTORS .