REMOVING
Determine dimension -a- from the center of the wheel to the lower edge of the wheel housing before starting work while the vehicle is resting on its wheels.
Place the vehicle on a hoist.
Remove the wheel.
Remove coil spring. Refer to COIL SPRING .
On vehicles with a level control system sensor -1-, remove the bolt -2-.
Scheme 262
Remove bolt -4-.
Scheme 263
Remove nut -3-.
Scheme 264
Remove the bolt -1- and the spacer tube -2-.
Note. Axle alignment is necessary if the nut -3- is loosened or the bolt -1- is removed.
Remove bolt -1-.
Scheme 265
Remove the nut -3- and bolt -2-.
Remove lower transverse link.