SUN VISOR CENTER BRACKET
Special tools and workshop equipment required
- Pry Lever 80 - 200
Scheme 135
Disengage the sun visor in the center of the vehicle at the center bracket and fold it to the side.
Unclip the sun visor center bracket cover -1- by sliding the pry lever 80 - 200 only approximately 1 mm under the cap -2 arrows-.
Note. If the pry lever 80 - 200 is shoved further underneath, it will then be under the center bearing for the sun visor. At that point, it is not possible to pry off the cover.
Remove sun visor center bracket -3- -arrow 4-.
Install in reverse order of removal. Note the following
Note. Make sure the expanding clips are not damaged when inserting the sun visor center bracket.