TRANSMISSION ALLOCATIONS, RATIOS AND CAPACITIES
- Date of manufacture
- Engine, manual transmission and automatic transmission allocation using code letters and PR numbers.
| CAUTION | Gear oil and ATF change on the Audi RS 5 The gear oil and the ATF must be changed on the Audi RS 5. Change intervals for the RS 5, refer to the Maintenance Intervals informaiton. There are no change intervals for the other vehicles. |
| Rear Final Drive | | 0BF |
|---|
| Code letters | | LFU | LFV | LFW |
| Ratio | Final drive Z 2 : Z 1 | 35 : 9 = 3.889 | 37 : 9 = 4.111 | 43 : 13 = 3.308 |
| Driveshaft flange diameter | | 75.5 mm | 75.5 mm | 75.5 mm |
| Gear oil capacity For the final drive (differential and pinion) No change interval, except RS 5 Change intervals for the RS 5, refer to the Maintenance Intervals information. | Refer to the appropriate Fluid Capacity Tables information. |
| Gear oil specification | |
| ATF capacity For the hydraulic control unit and chambers No change interval, except RS 5 Change intervals for the RS 5, refer to the Maintenance Intervals informaiton. | Refer to the appropriate Fluid Capacity Tables information. |
| ATF specification | |
| Rear Final Drive | | 0BF |
|---|
| Code letters | | LGH | LGJ | MBV |
| Ratio | Final drive Z 2 : Z 1 | 37 : 10 = 3.700 | 35 : 8 = 4.375 | 35 : 9 = 3.889 |
| Driveshaft flange diameter | | 75.5 mm | 75.5 mm | 75.5 mm |
| Gear oil capacity For the final drive (differential and pinion) No change interval, except RS 5 Change intervals for the RS 5, refer to the Maintenance Intervals information. | Refer to the appropriate Fluid Capacity Tables information |
| Gear oil specification | |
| ATF capacity For the hydraulic control unit and chambers No change interval, except RS 5 Change intervals for the RS 5, refer to the Maintenance Intervals information. | Refer to the appropriate Fluid Capacity Tables information. |
| ATF specification | |
| Rear Final Drive | | 0BF |
|---|
| Code letters | | MBW | MKV | MKW |
| Ratio | Final drive Z 2 : Z 1 | 37 : 10 = 3.700 | 43 : 13 = 3.308 | 35 : 8 = 4.375 |
| Driveshaft flange diameter | | 75.5 mm | 75.5 mm | 75.5 mm |
| Gear oil capacity For the final drive (differential and pinion) No change interval, except RS 5 Change intervals for the RS 5, refer to the Maintenance Intervals information. | Refer to the appropriate Fluid Capacity Tables information. |
| Gear oil specification | |
| ATF capacity For the hydraulic control unit and chambers No change interval, except RS 5 Change intervals for the RS 5. Refer to the Maintenance Intervals information. | Refer to the appropriate Fluid Capacity Tables information. |
| ATF specification | |
| Rear Final Drive | | 0BF |
|---|
| Code letters | | MKX | MKY | |
| Ratio | Final drive Z 2 : Z 1 | 35 : 9 = 3.889 | 37 : 10 = 3.700 | |
| Driveshaft flange diameter | | 75.5 mm | 75.5 mm | |
| Gear oil capacity For the final drive (differential and pinion) No change interval, except RS 5 Change intervals for the RS 5, refer to Maintenance Intervals | Refer to the appropriate Fluid Capacity Tables information. |
| Gear oil specification | |
| ATF capacity For the hydraulic control unit and chambers No change interval, except RS 5 Change intervals for the RS 5. Refer to the Maintenance Intervals information. | Refer to Fluid Capacity Tables. |
| ATF specification | |
