MINIMUM CURING TIMES
| WARNING | For safety reasons, use only electrically non-conductive 2K-adhesive when installing windshield and rear window using the materials listed below. The vehicle can only be used after the minimum curing time has elapsed. |
| Window type | Vehicle | Adhesive Sealing Material | Curing Time In Hours |
|---|---|---|---|
| Windshield | With airbag | 2K Window Adhesive Kit -D 004 660 M2 | 2 |
| Rear window | 2K Window Adhesive Kit -D 004 660 M2 | 2 | |
| Side windows | 1K window adhesive -DH 009 100 03 | 3 |
Adhesive Sealant, Removing from Window
It is recommended to use adhesive remover D 002 000 10 as a cleaning solution. Follow the safety precautions when using it.
| CAUTION | When cleaning from vehicle interior out, the window just installed must not be pressed outward. |
Paint Surfaces
Clean the painted surface with a dry cloth. Remove any remaining dirt with adhesive remover D 002 000 10.
Plastic Trim
Allow the adhesive sealant to harden (approximately 1 hour) and then peel it off.