Windshield spray jet setting Audi S4 B8

Windshield spray jet setting

1. Mark four points on windshield using water-soluble pen.

Scheme 65

Adjusting dimension

1. Dimension - a - = 2.0 to 2.5 mm
2. Dimension - b - = 465 to 490 mm
3. Dimension - c - = 2.0 to 415 mm
4. Dimension - d - = 140 to 2.5 mm

Note. Adjusting dimensions are calculated from outer edge of windshield. Locate individual spray jet points using windshield washer aiming tool T10127 with replacement tip 3.25/5A..

Note. If the spray field is uneven or does not adjust to the aforementioned specifications, replace the washer jet (repair measures).

Scheme 66

1. Adjust spray nozzle with windshield washer aiming tool T10127 so that washer fluid sprays onto areas shown on rear window above wiper.

1. Dimension - a - = approx. 125 mm
2. Dimension - b - = approx. 2.5 mm
3. Dimension - c - = approx. 5 mm