Home/Audi/S4/Audi S4 B7 (2004-2008)/Repair manual/Maintenance Procedures - Cabriolet/Perform battery load test

Contents

Wiring diagrams Section: Maintenance Procedures - Cabriolet

Engine overview

Delivery inspection

Oil change service

Inspection Service

All switches, all electrical components, all displays and other operating elements: Checking function

Automatic transmission

Continuously Variable Transmission (CVT)

Battery with "magic eye"

Battery sealing plugs

Valve-regulated lead acid battery or absorbed glass mat (AGM) battery

Necessary test equipment

Battery: Perform battery load test

Perform battery load test

Tester display during battery load test

Table

Brake fluid level, dependent on lining wear: Check

Brake fluid: Changing

Table - Sequence / quantity of brake fluid

Brake system: Visual inspection for leaks and damage

Brake pads: Thickness, checking

Tires, checking

Checking tire wear pattern

Check tread depth.

Spare wheel

Set digital clock

Radio clock

Quartz clock

DTC memory: Retrieving with VAS 5051/ 5052

Electric windows: Check positioning

Check vehicle key function

Rear lid hinges: Lubricate

Power steering fluid: Check for leaks and fluid level, top off fluid, if necessary

Calibrate rearview mirror with compass

A/C system: Check function, set temperature to 72 F (22 C)

Instrument cluster: Adapt language version

Cooling system: Check freeze protection, add coolant, if necessary

8-cyl. 5V engines 4.2L

Air cleaner: Clean air filter housing and replace filter

4-cyl. 1.8L Turbo engines

6-cyl. 3.0L MPI engines

6-cyl. 3.2L FSI engines

8-cyl. 4.2L MPI engines

8-cyl. 4.2L engines (RS4)

Engine oil: Fill

Engine: Oil level, checking

Engine (from above and below) and engine compartment: Visual inspection for leaks and damage

Continuously Variable transmission (CVT) 01J: Changing ATF

Engine oil: Drain/extract, replace oil filter

4-cyl. TFSI engines

6-cyl. 3.2L FSI gasoline engines

8-cyl. 4.2L MPI gasoline engines

8-cyl. 4.2L FSI gasoline engines, RS4

Navigation: Eject button, unlocking

Test drive: Perform

Radio: Activate anti-theft coding by entering security code

Radio/navigation system Plus (Chorus, Concert, Symphony): Deactivating transport mode

Select mode of operation

Select vehicle system

Wheel bolts

Correct wheel installation

Necessary special tools

Windshield spray jet setting

Washer jet adjustment, front window (Cabriolet)

Service display: Resetting or adapting

Service display, resetting

Oil quality, adapting

Maximum values, adapting

Service display, resetting without VAS 5051/5052

Headlamp washer system: Check spray jet setting.

Front axle joints: Seal boots, checking play and secure fit.

Windshield wiper blades: Checking park position (Cabriolet)

Headlamps: Check setting, adjust if necessary

Check and adjustment conditions

Tank filling table

Headlamps, checking adjustment (with new test screen without 15 setting line)

Fog lights

Vehicle Electrical System Control Module - J519: coding

Dust and pollen filter: Replacing

Manual transmission/final drive: Check oil level, add oil if necessary

Windshield/headlamp wiper system: Filling with fluid

Telematics: Emergency battery, replacing

Note before disconnecting battery.

Underbody protection: Visual inspection for damage

Anti-roll protection: Checking function (Cabriolet)

Winter tires from factory

4-cyl. 1.8L

4-cyl. 2.0L FSI and 2.0L TFSI engines

6-cyl. engines 3.0L and 3.2L FSI

8-cyl. engines 4.2L MPI

8-cyl. engines 4.2L (RS4)

Headlights: Aiming using Hella Universal Beamsetter IV

RAPGARD, inspection: Removal and disposal

Tire Pressure Monitoring System: Programming tire pressures

4-cyl. 5V 1.8L Turbo engines

4-cyl. 2.0L 5V engines

4-cyl. 4V 2.0L FSI engines

4-cyl. 4V 2.0L TFSI engines

6-cyl. 5V engines 2.4L; 3.0L

Type plate / Vehicle Identification Number (VIN)

Vehicle lifting

Tow starting/towing

Vehicle checks within inspection and service framework

All sections

Perform battery load test Audi S4 B7

Maintenance Procedures - Cabriolet

Perform battery load test

Switch ignition off.
Read battery tester operating instructions.
Connect test lead clamps to battery terminals as shown in battery tester operating instructions.

The clamps must make good contact with battery poles.

Load current depends on battery capacity and must be adjusted on the tester battery tester operating instructions.
Perform battery load test according to operating instructions.