Tailpipes, aligning Audi S4 B7

Tailpipes, aligning

1. Check distance of end pipes at left and right to bumper

Scheme 513

1. Dimension - x - left = dimension - x - right.

If necessary, correct dimension x as follows

Scheme 514

1. Loosen nuts - arrows - of brace between exhaust pipes.
2. Adjust distance between rear mufflers.
3. Tighten nut to 25 Nm.

Scheme 515

1. Check distances - y - and - z - of end pipes to bumper

1. Dimension - y - = greater than 20 mm.
2. Dimension - z - = 10 to 16 mm.

1. If necessary, check whether exhaust system is aligned tension-free --> Exhaust system, installing free of tension .