Home ReviewsRefund
Home/Audi/Q5/Audi Q5 I (2008-2012)/Repair manual/3.2l - Cooling System - Engine Code(s): Calb/COOLANT PUMP
Contents Wiring diagrams Section: 3.2l - Cooling System - Engine Code(s): Calb All sections

COOLANT PUMP Audi Q5 I

3.2l - Cooling System - Engine Code(s): Calb 3 illustrations ~135 words

COOLANT PUMP

Special tools and workshop equipment required

  1. Spanner Wrench 3212

Removing

Remove the front engine cover -bottom arrows-.

Scheme 91

Scheme 91
Scheme 91

Drain the coolant. Refer to COOLING SYSTEM, DRAINING AND FILLING .

Scheme 92

Scheme 92
Scheme 92

Remove ribbed belt. Refer to RIBBED BELT .

Remove the bolts for the coolant pump ribbed belt pulley, using a 3212 to counter hold.

Note. Lay a cloth below to catch escaping coolant.

Remove the coolant pump bolts -arrows- and the coolant pump.

Scheme 93

Scheme 93
Scheme 93

Installing

  1. For the correct tightening specifications, refer to «COOLANT PUMP, COOLANT THERMOSTAT AND CONNECTING PIECE OVERVIEW»(/audi/q5/i-2008-2012/remont/cooling-fan/#32l-cooling-system-engine-codes-calb) .

Install in reverse order, paying attention to the following

Clean the sealing surfaces; they must be free of oil and grease.

Install the ribbed belt. Refer to RIBBED BELT .

Fill the engine with coolant FILLING .