Determining average backlash
| Example | ||
|---|---|---|
| 1st measurement | 0.28 mm | |
| + | 2nd measurement | 0.30 mm |
| + | 3rd measurement | 0.30 mm |
| + | 4th measurement | 0.28 mm |
| = | Sum of measured values | 1.16 mm |
- Result: The average backlash is 1.16 ÷ 4 = 0.29 mm
Note. If the individual measurements differ by more than 0.06 mm from each other, the installation of the ring gear or the final drive set itself is not correct. Check installation, replace final drive set if necessary.