Electronic Power Control Components, Servicing Audi A8 D3 рестайлинг 2

Electronic Power Control Components, Servicing

Note. On vehicles with automatic transmissions, a separate Kick Down Switch F8 is installed. Kick down switch F8 , removing and installing --> Accelerator Pedal Module with Throttle Position Sensors, Removing and Installing .

Scheme 885

1 - Accelerator pedal module

1. Throttle Position (TP) Sensor G79
2. Accelerator Pedal Position Sensor 2 G185
3. Not adjustable
4. Throttle Position (TP) sensor communicates the drivers intentions to Engine Control Modules (ECMs)

1. Remove footwell cover to remove sensor
2. Checking --> «Throttle Position Sensor, Checking»(/audi/a8/d3-2-2007-2010/remont/cooling-fan/#60l-12-cyl-4v-generic-scan-tool-engine-codes-bsb__throttle-position-sensor-checking)
3. Removing and installing --> «Accelerator Pedal Module with Throttle Position Sensors, Removing and Installing»(/audi/a8/d3-2-2007-2010/remont/cooling-fan/#60l-12-cyl-4v-generic-scan-tool-engine-codes-bsb__accelerator-pedal-module-with-throttle-position)

2 - 10 Nm

3 - 6-pin harness connector

4 - 10 Nm