Home ReviewsRefund
Home/Audi/A6/Audi A6 C6 рестайлинг (2008-2011)/Repair manual/Suspension, Wheels, Steering/System bleeding or charging
Contents Section: Suspension, Wheels, Steering All sections

System bleeding or charging Audi A6 C6 рестайлинг

Suspension, Wheels, Steering

System bleeding or charging

  1. Connect VAS 5051 A , perform vehicle-specific entries in Guided Fault Finding and select "Function/component selection" via Goto button --> «VAS 5051 , connecting and selecting functions»(/audi/a6/c6-2008-2011/remont/axle-shafts/#suspension-wheels-steering__vas-5051-connecting-and-selecting) .

Then

  1. "Suspension"
  2. "Level control system".
  3. "On Board Diagnostic (OBD) capable systems"
  4. "Functions of Level Control System Control Module -J197-".
  1. "Level Control System Control Module -J197- system bleeding or charging".

Note. Note the following when charging rear axle.

Charging air spring of rear axle

CAUTIONWhen charging, make sure that centering pin - arrow a - drives into bore of longitudinal member - arrow b -.