REMOVING Audi A5 I

REMOVING

Note. It is not possible remove the decorative trim without damaging it.

Scheme 143

Loosen the lock washers -2- from the inside of the light alloy wheel.

Warm the decorative trim -1- from the outside using the V.A.G 1416.

Loosen the decorative trim -1- from the inside of the light alloy wheel using the 3409.

Grab under one corner from the outside and pull the decorative trim -1- off the light alloy wheel.

Note. The adhesive points for the PUR label are cut into the light alloy wheel. The remaining material serves as the adhesive base for the new decorative trim. The new decorative trim can be installed immediately.