MATERIALS AND TOOLS
Special tools and workshop equipment required
- Cutting tool kit VAS 6452
- Wire spool VAS 6452/1
- Cutting tool kit wire VAS 6452/2
- Cutting tools for glass V.A.G 1351
- Pull handle V.A.G 1351/1
- Suction lifter V.A.G 1344
- Window cutter V.A.G 1561A
- Angled blade V.A.G 1561/10
- Universal cutting blade V.A.G 1561/11
- Scraper (15+25 mm) V.A.G 1561/7+8
- Double cartridge gun VAS 5237
- Cartridge gun V.A.G 1628
- Cartridge heater V.A.G 1939A
| 2C Window Adhesive Kit D 004 660 M2 (1) |
|---|
| 1K window adhesive DH 009 100 03 (2) |
| Glass/paint primer D 009 200 02 |
| Cleaning solution D 009 401 04 |
| Applicator D 009 500 25 |
| Adhesive remover D 002 000 10 |
| Cutting wire 6452/2 or Cutting thread 357 853 999 |
| (1) Observe minimum curing time. Refer to MINIMUM CURING TIMES . (2) Small cartridge (110 ml) for sealing and/or when a 400 ml double cartridge is not sufficient. |
| (1) | Observe minimum curing time. Refer to MINIMUM CURING TIMES . |
| (2) | Small cartridge (110 ml) for sealing and/or when a 400 ml double cartridge is not sufficient. |
Adhesive Sealant, Removing from Window
It is recommended to use adhesive remover D 002 000 10 as a cleaning solution. Follow the safety precautions when using it.
| WARNING | When cleaning from vehicle interior out, the window just installed must not be pressed outward. |
Paint surfaces
First, clean paint surfaces with a dry cloth. Remove residual adhesive with adhesive remover D 002 000 10.
Plastic trim
Let the adhesive sealant harden (approximately 1 hour) and then peel it off.
Scheme 1
Special tools and workshop equipment required
- window repair kit VAS 1993 or VAS 6092
Note. Windshields with stone chips can be repaired with window repair kit VAS 6092 and repair resin, Talon VAS 1993/2. These damaged areas must not exceed a certain dimension or lie within the driver field of sight. For further details on use, refer to operating instructions enclosed with each kit.