Contents Wiring diagrams Section: Seat Frames (avant) All sections

BACKREST TRIM Audi A4 B8

Seat Frames (avant) 3 illustrations ~133 words

BACKREST TRIM

Removing

Scheme 586

Scheme 586: BACKREST TRIM

Remove the center armrest -3-. Refer to CENTER ARMREST, SPLIT BACKREST .

Push the padding and cover -1- to the side the remove the screw -4- for the backrest trim -2-.

Hold the backrest trim -2- by the lower edge and pull it as far as possible in the direction of the -arrow- off the backrest cover -1-.

Scheme 587

Scheme 587

Disengage the retaining tabs -4- and -5-.

Note. Ignore -3-.

Remove the backrest trim -1- in the direction of the -arrow- from the backrest cover -2- and unhook the upper hooks -top arrows-.

Scheme 588

Scheme 588

Remove the backrest trim.

Installing

CAUTIONThe hooks on the upper side of the backrest trim can get damaged during removal.

Check the backrest trim -1- around the hooks -top arrows- for damage; if necessary, replace them.

Further installation is performed in the reverse order of removal.