HEADLAMP RANGE CONTROL ADJUSTER
Removing
Scheme 278
Remove the driver side instrument panel cover. Refer to Removal and Installation .
Remove the instrument cluster gap cover. Refer to Removal and Installation .
Remove the bolts -arrows- and the light switch trim -1-.
Disconnect the light switch -E1- electrical connector.
Note. The illustration shows the light switch removed.
Disconnect the electrical connector -1- from the headlamp range control adjuster -E102- by pressing the release button.
Scheme 279
Carefully release the retaining hooks -arrows- using a small screwdriver.
Remove the headlamp range control adjuster -item 2- from the light switch trim.
Installing
Install in reverse order of removal, observing the following
Install the light switch trim. Refer to Removal and Installation .
Install the instrument cluster gap cover. Refer to Removal and Installation .
Install the driver side instrument panel cover. Refer to Removal and Installation .