HINGE ARM TRIM
Removing
Scheme 396
Remove the front center armrest upholstery. Refer to FRONT CENTER ARMREST UPHOLSTERY .
Carefully unclip the upper trim -1- from the hinge arm and from the lower trim -arrows- using a small screwdriver.
Remove the rear center console trim. Refer to CENTER CONSOLE REAR TRIM .
Scheme 397
Fold of the front center armrest.
Note. The illustration shows the front center armrest removed.
Unclip the lower trim -1- from the front center armrest hinge arm -arrows- using a screwdriver.
Installing
Install in reverse order of removal. Note the following
Press the covers on until they engage audibly.
Pay attention to the safety precautions when removing or installing an interior rearview mirror. Refer to INTERIOR REARVIEW MIRROR, SAFETY PRECAUTIONS and to the General Information INTERIOR REARVIEW MIRROR .
Note. Removing and installing the automatic dimming interior rearview mirror -Y7- is described. It is similar to the other versions.
Removing
Scheme 398
With Lane Assist
Remove the lower cover -1- -arrows-.
Using a screwdriver, unclip and remove the lower cover.
Remove the mirror base cover -1- using a screwdriver.
Scheme 399
Without Lane Assist
Scheme 400
Pry the cover -1- out on the bottom of the mirror base -arrows-.
All Vehicles
Scheme 401
Remove the electrical connector from its retainer.
Disconnect the electrical harness connector -2-.
Turn the interior rearview mirror counterclockwise -arrow- on the mirror base -1- as far as the stop.
Remove the interior rearview mirror from the retaining plate.
Installing
Install in reverse order of removal. Note the following
Position the interior rearview mirror turned 30° from its installation position.
Then turn the interior rearview mirror clockwise as far as the stop.