TOWER BRACE
Special tools and workshop equipment required
- Torque Wrench 5-50 Nm V.A.G 1331
Removing
Unclip the plenum chamber cover -1 and 3- and remove it.
Remove the bolt -1- and remove the E-box from the tower brace in the direction of the -arrow-.
Scheme 196
Remove the bolts -1- and nuts -2- and the tower brace -3-.
Scheme 197
Installing
Install in reverse order of removal. Note the following
Tightening specifications, refer to MOUNTING BRACKET, SHOCK ABSORBER FORK, UPPER CONTROL ARM AND TOWER BRACE OVERVIEW