Home ReviewsRefund
Home/Audi/A4/Audi A4 B8 (2007-2012)/Repair manual/2.0l - Cooling System - Engine Code(s): Caeb (avant)/RADIATOR FAN CONTROL MODULE
Contents Wiring diagrams Section: 2.0l - Cooling System - Engine Code(s): Caeb (avant) All sections

RADIATOR FAN CONTROL MODULE Audi A4 B8

2.0l - Cooling System - Engine Code(s): Caeb (avant) 1 illustration ~118 words

RADIATOR FAN CONTROL MODULE

Removing

Note. During installation, all cable ties must be installed at the same location.

Remove the noise insulation. Refer to Description and Operation .

Remove the coolant fan electrical connector -1- from the bracket and disconnect it by sliding the retainer back -arrow- and pressing the release down.

Free up the electrical wiring harness to the radiator fan control module.

Disconnect electrical connectors -2- and -3-.

Scheme 106

Scheme 106
Scheme 106

Remove the bolt -arrow- and the coolant fan control module -1-.

Installing

Install in reverse order of removal. Note the following

  1. Tightening specifications, refer to «RADIATOR AND RADIATOR FAN OVERVIEW»(/audi/a4/b8-2007-2012/remont/cooling-fan/#20l-cooling-system-engine-codes-caeb-avant__radiator-and-radiator-fan-overview) .

Install the front noise insulation. Refer to Description and Operation .