Home ReviewsRefund
Home/Audi/A4/Audi A4 B5 рестайлинг (1999-2001)/Repair manual/2.8l v6 30v (engine Code: Aha, Atq)/Removal & Installation (Cog Driven)
Contents Section: 2.8l v6 30v (engine Code: Aha, Atq) All sections

Removal & Installation (Cog Driven) Audi A4 B5 рестайлинг

2.8l v6 30v (engine Code: Aha, Atq) ~125 words

Removal & Installation (Cog Driven)

  1. Oil pump drive components are located behind front engine cover. Drain engine coolant. See «DRAINING COOLING SYSTEM»(/audi/a4/b5-1999-2001/remont/mechanical/#28l-v6-30v-engine-code-aha-atq__draining-cooling-system).
  2. Remove oil pan. See «OIL PAN»(/audi/a4/b5-1999-2001/remont/mechanical/#28l-v6-30v-engine-code-aha-atq__oil-pana4-a6) under REMOVAL & INSTALLATION.
  3. Remove timing belt. See «TIMING BELT»(/audi/a4/b5-1999-2001/remont/mechanical/#28l-v6-30v-engine-code-aha-atq__timing-belt) under REMOVAL & INSTALLATION.
  4. Remove idler pulley. Remove crankshaft gear. Remove oil spray jet valve from front cover. Remove timing belt tensioner. (Scheme 222)and (Scheme 223).
  5. Remove lever for timing belt tensioner. Remove oil pump. To install, reverse removal procedure. Ensure drive cog on oil pump engages crankshaft. Replace oil seal. See «CRANKSHAFT FRONT OIL SEAL»(/audi/a4/b5-1999-2001/remont/mechanical/#28l-v6-30v-engine-code-aha-atq__crankshaft-front-oil-seal) under REMOVAL & INSTALLATION.
  6. Tighten components to specification. See «TORQUE SPECIFICATIONS»(/audi/a4/b5-1999-2001/remont/mechanical/#28l-v6-30v-engine-code-aha-atq__torque-specifications).
  7. Refill and bleed air from cooling system. See «COOLING SYSTEM BLEEDING»(/audi/a4/b5-1999-2001/remont/mechanical/#28l-v6-30v-engine-code-aha-atq__cooling-system-bleeding) under REMOVAL & INSTALLATION.