FASTENER TIGHTENING SPECIFICATIONS
| Component | Bolt Size | Nm |
|---|
| Angle Piece for Right Secondary Air Injection (AIR) Combination Valve | | 9 |
| Bracket (5) | | 20 |
| Bracket (6) | | 10 |
| Bracket for Exhaust System | | 23 |
| Bracket for Secondary Air Injection (AIR) Pump Motor |
| Bolt | | 9 |
| Nut | | 9 |
| Clamping Sleeve, Nut | | 40 (2) |
| Connection for Coolant and Secondary Air Injection (AIR) Combi-Valve, Eng. Code BUB (7) | | 9 |
| Connection for Coolant and Left Secondary Air Injection (AIR) Combination Valve, Eng. Code CBRA (8) | | 9 |
| Connection for Right Secondary Air Injection (AIR) Combination Valve, Eng. Code CBRA | | 9 |
| Exhaust Manifold, Nut | | 23 (2) |
| Exhaust Manifold Heat Shield to Cylinder Head | | 20 |
| Front Exhaust Pipe Support |
| | 25 (1) |
| | 40 (1) |
| Front Exhaust Pipe With Catalytic Converters and Front Muffler, Nut | | 40 (2) |
| Heat Shield | | 10 |
| Oxygen Sensor in Front Exhaust Pipe | | 55 |
| Pipe | | 9 |
| Secondary Air Injection (AIR) Combination Valve on the Bracket or Connector | | 9 |
| Secondary Air Injection (AIR) Pump Bracket | M6 | 10 |
| To Cylinder Block | M8 | 20 |
| Secondary Air Injection Sensor 1 to Pipe | | 3.5 |
| Suspended Mount (4) | | 25 (2) |
| Suspended Mount (3) | | 23 (3) |
| Throttle Valve Control Module to Intake Manifold | | 10 |
| (1) For bolt tightening clarification, refer to EXHAUST SYSTEM COMPONENT OVERVIEW and see items -13 and 14- (2) Always replace (3) For bolt tightening clarification, refer to EXHAUST SYSTEM COMPONENT OVERVIEW and see items -21- (4) For bolt tightening clarification, refer to EXHAUST SYSTEM COMPONENT OVERVIEW and see items -9- (5) For bolt tightening clarification, refer to EXHAUST MANIFOLD COMPONENT OVERVIEW and see items -7- (6) For bolt tightening clarification, refer to EXHAUST MANIFOLD COMPONENT OVERVIEW and see items -9- (7) For bolt tightening clarification, refer to Vehicles with engine code BUB and see item -9- (8) For bolt tightening clarification, refer to Vehicles with engine code CBRA and see item -13 |
| (1) | For bolt tightening clarification, refer to EXHAUST SYSTEM COMPONENT OVERVIEW and see items -13 and 14 |
| (3) | For bolt tightening clarification, refer to EXHAUST SYSTEM COMPONENT OVERVIEW and see items -21 |
| (4) | For bolt tightening clarification, refer to EXHAUST SYSTEM COMPONENT OVERVIEW and see items -9 |
| (5) | For bolt tightening clarification, refer to EXHAUST MANIFOLD COMPONENT OVERVIEW and see items -7 |
| (6) | For bolt tightening clarification, refer to EXHAUST MANIFOLD COMPONENT OVERVIEW and see items -9 |
| (7) | For bolt tightening clarification, refer to Vehicles with engine code BUB and see item -9 |
| (8) | For bolt tightening clarification, refer to Vehicles with engine code CBRA and see item -13 |
