FASTENER TIGHTENING SPECIFICATIONS
| Component | Fastener Size | Nm |
|---|
| Adapter between Connector Piece and High Pressure Fuel Line | | 40 |
| Air Filter Housing Upper Section | | 1.5 |
| Fuel Pressure Sensor | | 27 |
| Fuel Supply Line Connectors 1 | | 25 |
| Fuel Supply Line to the Fuel Rail Connections 1 | | 40 |
| Fuel Supply Line Union Nut | | 20 |
| High Pressure Fuel Line | | 20 |
| High Pressure Pump 2 | M8 | 20 |
| Intake Air Temperature (IAT) Sensor | | 11 |
| Intake Air Temperature (IAT) Sensor Bolt | | 5 |
| Intake Manifold | | 9 |
| Intake Manifold Support |
| Nut | | 10 |
| Bolt | | 23 |
| Knock Sensor (KS) 1 | | 20 |
| Mass Airflow (MAF) Sensor | | 1.5 |
| Oxygen Sensor | | 55 |
| Throttle Valve Control Module | | 5 |
| Turbocharger Recirculating Valve | | 7 |
| Wastegate Bypass Regulator Valve | | 3 |
| 1 Always replace 2 Tighten by hand in a diagonal sequence and then tighten to 5 Nm |
