Home ReviewsRefund
Home/Audi/A3/Audi A3 8P facelift 2 (2008-2013)/Repair manual/3.2L - Engine Assembly - Engine Code(s): Bub & Cbra/ENGINE AND DSG TRANSMISSION, SEPARATING
Contents Wiring diagrams Section: 3.2L - Engine Assembly - Engine Code(s): Bub & Cbra All sections

ENGINE AND DSG TRANSMISSION, SEPARATING Audi A3 8P facelift 2

3.2L - Engine Assembly - Engine Code(s): Bub & Cbra 3 illustrations ~112 words

ENGINE AND DSG TRANSMISSION, SEPARATING

Special tools and workshop equipment required

  1. Shop Crane VAS 6100
  2. Bracket T10013
  3. Bolt M8x40 with nut and washer exterior dia. 30 mm

Procedure

  1. Engine/transmission assembly removed and mounted on engine mount.

Remove bolts -1- and -2- at bevel box bracket -A- and remove bracket.

Scheme 489

Scheme 489
Scheme 489

Disconnect coolant hoses -arrows- at transmission oil cooler.

Scheme 490

Scheme 490
Scheme 490

Remove bolts from T10013 by releasing circlip.

Scheme 491

Scheme 491
Scheme 491

Secure T10013 with bolt M8x40 and a washer exterior dia. 30 mm to transmission lifting eye.

Engage VAS 6100 at T10013.

Remove bolts -1-, -2- and -5 to 10- at engine/transmission flange.

Pull transmission off from engine.