RAIN/LIGHT RECOGNITION SENSOR Audi A3 8P facelift

RAIN/LIGHT RECOGNITION SENSOR

Removing

Scheme 70

Remove the interior rearview mirror, refer to AUTOMATIC DIMMING INTERIOR REARVIEW MIRROR .

Unclip retaining spring -3- from retaining plate -1-.

Remove Rain/Light Recognition Sensor -G397- -2- from retaining plate -1-.

Installation

Installation is reverse of removal, but note the following

Ensure that retaining spring -3- engages correctly in retaining plate -1-.

Scheme 71

1. Padding Removing and Installing, refer to UPHOLSTERY Is not disassembled
2. Right Side Cover Removing and Installing, refer to LEFT AND RIGHT SIDE COVER
3. Cover Profile Placed in frame Note location see scheme 109
4. Left Side Cover Removing and Installing, refer to LEFT AND RIGHT SIDE COVER
5. Rear Cover Removing and Installing, refer to REAR COVER
6. Screws 0.7 Nm Quantity: 2
7. Screws 0.7 Nm Quantity: 2
8. Trim Removing and Installing, refer to TRIM
9. Carrier It is not possible to disassemble the carrier with adjuster
10. Storage Compartment Removing and Installing, refer to STORAGE COMPARTMENT
11. Engaging Element Clipped in

Scheme 72

Ensure cover profile -2- is positioned correctly in frame -arrow- in center armrest -1-.