Home ReviewsRefund
Home/Audi/A3/Audi A3 8P рестайлинг (2004-2008)/Repair manual/2.0l - Multiport Fuel Injection - Engine Code(s): Bpy/THROTTLE VALVE CONTROL MODULE
Contents Section: 2.0l - Multiport Fuel Injection - Engine Code(s): Bpy All sections

THROTTLE VALVE CONTROL MODULE Audi A3 8P рестайлинг

2.0l - Multiport Fuel Injection - Engine Code(s): Bpy 1 illustration

THROTTLE VALVE CONTROL MODULE

Removing

Remove engine cover. Refer to ENGINE COVER WITH AIR FILTER ELEMENT .

Remove the noise insulation.

Loosen bolts and clamps -arrows- and remove charge air pipe and hose downward.

Scheme 143

Scheme 143: THROTTLE VALVE CONTROL MODULE
Scheme 143: THROTTLE VALVE CONTROL MODULE

Remove four bolts on throttle valve control module -J338- and remove it.

Installing

Installation is performed in reverse order.

After the replacing the throttle valve control module, it must be adapted to the engine control module -J623- (basic Set ting, display group 60) see vehicle diagnosis and service system VAS 5052 guided functions.