PENDULUM SUPPORT
Removing
Remove the noise insulation. Refer to Removal and Installation .
Note. Depending on the version, different noise insulation may be installed.
Remove the bolts -1, 2, 3- and remove the pendulum support.
Installing
Install in reverse order, paying attention to the following
- Tightening specifications, refer to «SUBFRAME MOUNT OVERVIEW»(/audi/a3/8p-2-2008-2013/remont/automatic-trans/#controls-housing-direct-shift-automatic-transmission-02e-awd) .
Note. Replace bolts that are tightened to the specification.
Attach the pendulum support to the transmission, bolts -2- and -3- and then to the subframe -1-.
Install the noise insulation. Refer to Removal and Installation .