Note. Riding height should vary less than 1" (25.4 mm) between left and right side of vehicle.
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | .75 | 1.25 To -.25 |
| Rear | 1.50 | 1.83 To -1.17 |
| Caster (1) | 2.25 | 2.75 To 1.75 |
| Toe-In (2) |
| Front | .08 (2) | 0 To .16 (0 To 4) |
| Rear | .12 (4) | 0 To .25 (0 To 6) |
| Toe-In (1) |
| Front | .16 | 0 To .20 |
| Rear | .25 | 0 To .64 |
| Toe-Out On Turns | (3) | (3) |
| (1) Measurements are in degrees. (2) Measurements are in inches (mm). (3) Specifications are not available. |
| (1) | Measurements are in degrees. |
| (2) | Measurements are in inches (mm). |
| (3) | Specifications are not available. |
WHEEL ALIGNMENT SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Ball Joint-To-Control Arm Nuts | 48 (65) |
| Lug Nuts | 81 (110) |
