Note. Riding height should vary less than 1" (25.4 mm) between left and right side of vehicle.
| Application | Preferred | Range |
|---|
| 80 |
| Camber (1) |
| Front | -.75 | -1.25 To -.25 |
| Rear | -1 | -1.33 To -.67 |
| Caster (1) | 1.25 | .75 To 1.75 |
| Toe-In (2) |
| Front | .08 (2) | 0 To .16 (0 To 4) |
| Rear | .16 (4) | 0 To .32 (0 To 8) |
| Toe-In (1) |
| Front | .17 | 0 To .33 |
| Rear | .33 | 0 To .67 |
| Toe-Out On Turns | (3) | (3) |
| 100 |
| Camber (1) |
| Front |
| A/T | -.67 | -1.08 To -.08 |
| M/T | -.87 | -1.33 To -.33 |
| Rear | -.87 | -1.33 To -.33 |
| Caster (1) | 1.17 | .5 To 1.83 |
| Toe-In (2) |
| Front | .12 (3) | .04 To .16 (1 To 4) |
| Rear | .16 (4) | .08 To .25 (2 To 6) |
| Toe-In (1) |
| Front | .25 | .08 To .33 |
| Rear | .33 | .17 To .5 |
| Toe-Out On Turns | (3) | (3) |
| (1) Measurements are in degrees. (2) Measurements are in inches (mm). (3) Specifications are not available. |
| (1) | Measurements are in degrees. |
| (2) | Measurements are in inches (mm). |
| (3) | Specifications are not available. |
WHEEL ALIGNMENT SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Ball Joint-To-Control Arm Nuts (80) | 48 (65) |
| Strut Mounting Bolts (100) | 22 (30) |
| Lug Nuts | 80 (108) |
