Audio disc does not eject (with navigation) Acura ZDX I

Audio disc does not eject (with navigation)

Note. Check the vehicle battery condition first (see BATTERY TEST ). Disc labels should not be used in the audio-navigation unit. They may jam and damage the player mechanism. Check the connectors for poor connections or loose terminals.

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.
2. Turn on the audio system. Does the system turn on? YES -Go to step 3. NO -Go to «AUDIO UNIT POWER SWITCH WILL NOT TURN ON (NO INFORMATION DISPLAY AND NO SOUND) TROUBLESHOOTING»(/acura/zdx/i-2009-2013/remont/entertainment-systems/#audio-system__audio-unit-power-switch-will-not) (see ).
3. Check to see if the disc ejects correctly with no binding when you push the EJECT button. Does the disc eject properly? YES -Operation is normal. NO -Substitute a known-good audio-navigation unit (including the HDD) (see «AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION»(/acura/zdx/i-2009-2013/remont/entertainment-systems/#navigation-system__audio-navigation-unit-removalinstallation) ), and recheck. If the symptom/indication goes away, replace the original audio-navigation unit (see «AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION»(/acura/zdx/i-2009-2013/remont/entertainment-systems/#navigation-system__audio-navigation-unit-removalinstallation) ).