Home ReviewsRefund
Home/Acura/TL/Acura TL IV (2008-2011)/Repair manual/Vsa (vehicle Stability Assist) System Components/System Indicator
Contents Wiring diagrams Section: Vsa (vehicle Stability Assist) System Components All sections

System Indicator Acura TL IV

Vsa (vehicle Stability Assist) System Components 2 illustrations ~101 words

System Indicator

This system has four indicators

Scheme 3

Scheme 3: System Indicator
Scheme 3: System Indicator

Scheme 4

Scheme 4
Scheme 4
  1. ABS indicator (A)
  2. Brake system indicator (B)
  3. VSA indicator (C)
  4. VSA activation indicator (D) ('09 model)
  5. VSA OFF indicator ('10-11 Model) (E) '09 model '10-11 model When the system detects a problem, it will turn the appropriate indicators on. Depending on the failure, the VSA modulator-control unit determines which indicators are turned on. When the system is OK, each indicator comes on for about 2 seconds after turning the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, then goes off.