OBD Monitor ID by Model
| Monitor | OBD Monitor ID | Test ID | Unit and Scaling ID | TSX | RDX | RL | MDX | TL |
|---|
| A/F Sensor (Bank 1) | $01 | $80 | $11 | X | X | X | X | X |
| $01 | $81 | $14 | | | X | X | |
| $01 | $82 | $0B | | | X | X | X |
| $01 | $83 | $8D | X | X | X | X | X |
| $01 | $84 | $8D | X | X | X | X | X |
| $01 | $85 | $01 | X | X | X | X | X |
| $01 | $86 | $8D | X | X | X | X | X |
| $01 | $87 | $14 | X | | X | X | X |
| $01 | $88 | $0B | | | X | X | X |
| A/F Sensor (Bank 2) | $05 | $80 | $11 | | | X | X | X |
| $05 | $81 | $14 | | | X | X | |
| $05 | $82 | $0B | | | X | X | X |
| $05 | $83 | $8D | | | X | X | X |
| $05 | $84 | $8D | | | X | X | X |
| $05 | $85 | $01 | | | X | X | X |
| $05 | $86 | $8D | | | X | X | X |
| $05 | $87 | $14 | | | X | X | X |
| $05 | $88 | $0B | | | X | X | X |
| Secondary HO2S (Bank 1) | $02 | $98 | $0B | | X | | X | |
| $02 | $99 | $0B | | X | | X | |
| $02 | $9A | $0B | X | X | X | X | X |
| $02 | $9B | $10 | | X | | X | |
| $02 | $9C | $0B | X | X | X | X | X |
| $02 | $9D | $0B | X | | X | | X |
| Secondary HO2S (Bank 2) | $06 | $98 | $0B | | | | X | |
| $06 | $99 | $0B | | | | X | |
| $06 | $9A | $0B | | | X | X | X |
| $06 | $9B | $10 | | | | X | |
| $06 | $9C | $0B | | | X | X | X |
| $06 | $9D | $0B | | | X | | X |
| Catalyst (Bank 1) | $21 | $A0 | $01 | | X | | X | |
| $21 | $A1 | $0B | X | | X | | X |
| Catalyst (Bank 2) | $22 | $A0 | $01 | | | | X | |
| $22 | $A1 | $0B | | | X | | X |
| EGR System | $31 | $D0 | $32 | | | X | X | X |
| $31 | $D1 | $32 | | | X | X | X |
| $31 | $D2 | $39 | | | X | X | X |
| $31 | $D3 | $01 | | | X | | X |
| VTC (VVT) System | $35 | $D4 | $1C | X | | | | |
| $35 | $D5 | $1C | X | | | | |
| $35 | $D6 | $1C | X | | | | |
| $35 | $D7 | $1C | X | | | | |
| EVAP System | $39 | $B2 | $FD | | X | | | |
| $3A | $B3 | $FD | | | | | |
| $3A | $BA | $12 | X | X | X | X | X |
| $3C | $B4 | $06 | X | X | X | X | X |
| $3C | $B5 | $83 | X | | X | X | X |
| $3C | $B6 | $12 | X | | X | X | X |
| $3C | $B7 | $10 | X | | X | X | X |
| $3C | $B8 | $FE | X | | X | X | X |
| $3D | $B0 | $FD | | X | X | | |
| $3D | $B1 | $FD | | X | X | | |
| $3D | $B9 | $30 | X | X | X | X | X |
| $3D | $BB | $30 | | X | | | |
| $3D | $BC | $10 | | X | | | |
| Fuel System (Bank 1) | $81 | $D8 | $05 | | X | X | X | |
| Fuel System (Bank 2) | $82 | $D8 | $05 | | | X | X | |
| Misfire | $A2 | $0B | $24 | X | | X | | X |
| $A2 | $0C | $24 | X | X | X | X | X |
| $A3 | $0B | $24 | X | | X | | X |
| $A3 | $0C | $24 | X | X | X | X | X |
| $A4 | $0B | $24 | X | | X | | X |
| $A4 | $0C | $24 | X | X | X | X | X |
| $A5 | $0B | $24 | X | | X | | X |
| $A5 | $0C | $24 | X | X | X | X | X |
| $A6 | $0B | $24 | | | X | | X |
| $A6 | $0C | $24 | | | X | X | X |
| $A7 | $0B | $24 | | | X | | X |
| $A7 | $0C | $24 | | | X | X | X |
A/F Sensor (Bank 1)
| OBD Monitor ID | $01 | Test ID | $80 | Unit and Scaling ID | $11 |
|---|
| DTC | P0134 |
| Test Description | Check of A/F sensor "non-activation" time. See Test ID $81 and $82 for "non-activation" criteria. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.1 (sec.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.1 (sec.) |
DTC P0134: Monitor ID $01: Test ID $80
| OBD Monitor ID | $01 | Test ID | $81 | Unit and Scaling ID | $14 |
|---|
| DTC | P0134 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor element resistance. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (ohms) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1 (ohms) |
DTC P0134: Monitor ID $01: Test ID $81
| OBD Monitor ID | $01 | Test ID | $82 | Unit and Scaling ID | $0B |
|---|
| DTC | P0134 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor cell voltage. |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (V) The lowest limit value: Output value (Decimal) x 0.01 (V) The highest limit value: Output value (Decimal) x 0.01 (V) |
DTC P0134: Monitor ID $01: Test ID $82
| OBD Monitor ID | $01 | Test ID | $83 | Unit and Scaling ID | $8D |
|---|
| DTC | P2195 |
| Test Description | Check of the A/F sensor "too lean" by monitoring the A/F sensor signal. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Not applicable |
DTC P2195: Monitor ID $01: Test ID $83
| OBD Monitor ID | $01 | Test ID | $84 | Unit and Scaling ID | $8D |
|---|
| DTC | P2A00 |
| Test Description | Check of A/F sensor rationality by monitoring the sensor signal during fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Output value (Decimal) x 0.003906 (mA) |
DTC P2A00: Monitor ID $01: Test ID $84
| OBD Monitor ID | $01 | Test ID | $85 | Unit and Scaling ID | $01 |
|---|
| DTC | P0133 |
| Test Description | Response check of A/F sensor by monitoring the amplitude of filtered sensor signal during stable driving condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: No unit The lowest limit value: No unit The highest limit value: Not applicable |
DTC P0133: Monitor ID $01: Test ID $85
| OBD Monitor ID | $01 | Test ID | $86 | Unit and Scaling ID | $8D |
|---|
| DTC | P1172 |
| Test Description | Check of A/F sensor "out of range" by monitoring the sensor signal. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Not applicable |
DTC P1172: Monitor ID $01: Test ID $86
| OBD Monitor ID | $01 | Test ID | $87 | Unit and Scaling ID | $14 |
|---|
| DTC | P0134 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor element resistance during A/F feedback control. |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (ohms) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1 (ohms) |
DTC P0134: Monitor ID $01: Test ID $87
| OBD Monitor ID | $01 | Test ID | $88 | Unit and Scaling ID | $0B |
|---|
| DTC | P0134 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor cell voltage during A/F feedback control. |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (V) The lowest limit value: Output value (Decimal) x 0.01 (V) The highest limit value: Output value (Decimal) x 0.01 (V) |
DTC P0134: Monitor ID $01: Test ID $88
A/F Sensor (Bank2)
| OBD Monitor ID | $05 | Test ID | $80 | Unit and Scaling ID | $11 |
|---|
| DTC | P0154 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor non-activation time. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.1 (sec.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.1 (sec.) |
DTC P0154: Monitor ID $05: Test ID $80
| OBD Monitor ID | $05 | Test ID | $81 | Unit and Scaling ID | $14 |
|---|
| DTC | P0154 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor element resistance. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (ohms) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1 (ohms) |
DTC P0154: Monitor ID $05: Test ID $81
| OBD Monitor ID | $05 | Test ID | $82 | Unit and Scaling ID | $0B |
|---|
| DTC | P0154 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor cell voltage. |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (V) The lowest limit value: Output value (Decimal) x 0.01 (V) The highest limit value: Output value (Decimal) x 0.01 (V) |
DTC P0154: Monitor ID $05: Test ID $82
| OBD Monitor ID | $05 | Test ID | $83 | Unit and Scaling ID | $8D |
|---|
| DTC | P2197 |
| Test Description | Check of the A/F sensor "too lean" by monitoring the A/F sensor signal. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Not applicable |
DTC P2197: Monitor ID $05: Test ID $83
| OBD Monitor ID | $05 | Test ID | $84 | Unit and Scaling ID | $8D |
|---|
| DTC | P2A03 |
| Test Description | Check of A/F sensor rationality by monitoring the sensor signal during fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Output value (Decimal) x 0.003906 (mA) |
DTC P2A03: Monitor ID $05: Test ID $84
| OBD Monitor ID | $05 | Test ID | $85 | Unit and Scaling ID | $01 |
|---|
| DTC | P0153 |
| Test Description | Response check of A/F sensor by monitoring the amplitude of filtered sensor signal during stable driving condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: No unit The lowest limit value: No unit The highest limit value: Not applicable |
DTC P0153: Monitor ID $05: Test ID $85
| OBD Monitor ID | $05 | Test ID | $86 | Unit and Scaling ID | $8D |
|---|
| DTC | P1174 |
| Test Description | Check of A/F sensor "out of range" by monitoring the sensor signal. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.003906 (mA) The lowest limit value: Output value (Decimal) x 0.003906 (mA) The highest limit value: Not applicable |
DTC P1174: Monitor ID $05: Test ID $86
| OBD Monitor ID | $05 | Test ID | $87 | Unit and Scaling ID | $14 |
|---|
| DTC | P0154 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor element resistance during A/F feedback control. |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (ohms) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1 (ohms) |
DTC P0154: Monitor ID $05: Test ID $87
| OBD Monitor ID | $05 | Test ID | $88 | Unit and Scaling ID | $0B |
|---|
| DTC | P0154 |
| Test Description | Check of A/F sensor "non-activation" by monitoring the sensor cell voltage during A/F feedback control. |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (V) The lowest limit value: Output value (Decimal) x 0.01 (V) The highest limit value: Output value (Decimal) x 0.01 (V) |
DTC P0154: Monitor ID $05: Test ID $88
Secondary HO2S (Bank 1)
| OBD Monitor ID | $02 | Test ID | $98 | Unit and Scaling ID | $0B |
|---|
| DTC | P2270 |
| Test Description | Check of secondary heated oxygen sensor signal "lean" stuck by monitoring the sensor output voltage after fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Output value (Decimal) x 0.001 (V) The highest limit value: Not applicable |
DTC P2270: Monitor ID $02: Test ID $98
| OBD Monitor ID | $02 | Test ID | $99 | Unit and Scaling ID | $0B |
|---|
| DTC | P2271 |
| Test Description | Check of secondary heated oxygen sensor signal "rich" stuck by monitoring the sensor output voltage after fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (V) |
DTC P2271: Monitor ID $02: Test ID $99
| OBD Monitor ID | $02 | Test ID | $9A | Unit and Scaling ID | $0B |
|---|
| DTC | P0137 |
| Test Description | Circuit check of secondary heated oxygen sensor by monitoring the sensor output voltage. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (V) |
DTC P0137: Monitor ID $02: Test ID $9A
| OBD Monitor ID | $02 | Test ID | $9B | Unit and Scaling ID | $10 |
|---|
| DTC | P0139 |
| Test Description | Response check of secondary heated oxygen sensor by monitoring the sensor output voltage after fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (sec.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1 (sec.) |
DTC P0139: Monitor ID $02: Test ID $9B
| OBD Monitor ID | $02 | Test ID | $9C | Unit and Scaling ID | $0B |
|---|
| DTC | P0138 |
| Test Description | Circuit check of secondary heated oxygen sensor by monitoring the sensor output voltage. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Output value (Decimal) x 0.001 (V) The highest limit value: Not applicable |
DTC P0138: Monitor ID $02: Test ID $9C
| OBD Monitor ID | $02 | Test ID | $9D | Unit and Scaling ID | $0B |
|---|
| DTC | P0139 |
| Test Description | Response check of secondary heated oxygen sensor by monitoring the sensor output voltage during fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (V) |
DTC P0139: Monitor ID $02: Test ID $9D
Secondary HO2S (Bank 2)
| OBD Monitor ID | $06 | Test ID | $98 | Unit and Scaling ID | $0B |
|---|
| DTC | P2272 |
| Test Description | Check of secondary heated oxygen sensor signal "lean" stuck by monitoring the sensor output voltage after fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Output value (Decimal) x 0.001 (V) The highest limit value: Not applicable |
DTC P2272: Monitor ID $06: Test ID $98
| OBD Monitor ID | $06 | Test ID | $99 | Unit and Scaling ID | $0B |
|---|
| DTC | P2273 |
| Test Description | Check of secondary heated oxygen sensor signal "rich" stuck by monitoring the sensor output voltage after fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (V) |
DTC P2273: Monitor ID $06: Test ID $99
| OBD Monitor ID | $06 | Test ID | $9A | Unit and Scaling ID | $0B |
|---|
| DTC | P0157 |
| Test Description | Circuit check of secondary heated oxygen sensor by monitoring the sensor output voltage. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (V) |
DTC P0157: Monitor ID $06: Test ID $9A
| OBD Monitor ID | $06 | Test ID | $9B | Unit and Scaling ID | $10 |
|---|
| DTC | P0159 |
| Test Description | Response check of secondary heated oxygen sensor by monitoring the sensor output voltage after fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (sec.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1 (sec.) |
DTC P0159: Monitor ID $06: Test ID $9B
| OBD Monitor ID | $06 | Test ID | $9C | Unit and Scaling ID | $0B |
|---|
| DTC | P0158 |
| Test Description | Circuit check of secondary heated oxygen sensor by monitoring the sensor output voltage. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Output value (Decimal) x 0.001 (V) The highest limit value: Not applicable |
DTC P0158: Monitor ID $06: Test ID $9C
| OBD Monitor ID | $06 | Test ID | $9D | Unit and Scaling ID | $0B |
|---|
| DTC | P0159 |
| Test Description | Response check of secondary heated oxygen sensor by monitoring the sensor output voltage during fuel cut condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (V) |
DTC P0159: Monitor ID $06: Test ID $9D
Catalyst (Bank 1)
| OBD Monitor ID | $21 | Test ID | $A0 | Unit and Scaling ID | $01 |
|---|
| DTC | P0420 |
| Test Description | Catalyst capability, monitored by measuring the fluctuation of the secondary heated oxygen sensor output value. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: No unit The lowest limit value: Not applicable The highest limit value: No unit |
DTC P0420: Monitor ID $21: Test ID $A0
| OBD Monitor ID | $21 | Test ID | $A1 | Unit and Scaling ID | $0B |
|---|
| DTC | P0420 |
| Test Description | Catalyst capability, monitored by measuring the stability of the secondary heated oxygen sensor output value. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (V) |
DTC P0420: Monitor ID $21: Test ID $A1
Catalyst (Bank 2)
| OBD Monitor ID | $22 | Test ID | $A0 | Unit and Scaling ID | $01 |
|---|
| DTC | P0430 |
| Test Description | Catalyst capability, monitored by measuring the fluctuation of the secondary heated oxygen sensor output value. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: No unit The lowest limit value: Not applicable The highest limit value: No unit |
DTC P0430: Monitor ID $22: Test ID $A0
| OBD Monitor ID | $22 | Test ID | $A1 | Unit and Scaling ID | $0B |
|---|
| DTC | P0430 |
| Test Description | Check of catalyst capability by monitoring the stability of the secondary heated oxygen sensor output value. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (V) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (V) |
DTC P0430: Monitor ID $22: Test ID $A1
EGR System
| OBD Monitor ID | $31 | Test ID | $D0 | Unit and Scaling ID | $32 |
|---|
| DTC | P0404 |
| Test Description | Check of EGR valve by comparing the actual valve lift value to the ECM/PCM commanded valve lift value. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.0000305 (inch) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.0000305 (inch) |
DTC P0404: Monitor ID $32: Test ID $D0
| OBD Monitor ID | $31 | Test ID | $D1 | Unit and Scaling ID | $32 |
|---|
| DTC | P2413 |
| Test Description | Check of EGR valve by comparing the actual valve lift value to the ECM/PCM commanded valve lift value. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value lift: Output value (Decimal) x 0.0000305 (inch) The lowest limit value lift: Output value (Decimal) x 0.0000305 (inch) The highest limit value lift: Not applicable |
DTC P2413: Monitor ID $31: Test ID $D1
| OBD Monitor ID | $31 | Test ID | $D2 | Unit and Scaling ID | $39 |
|---|
| DTC | P0401 |
| Test Description | Check EGR flow by monitoring the change in intake manifold pressure between EGR valve open and closed during fuel cut. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (%) The lowest limit value: Output value (Decimal) x 0.01 (%) The highest limit value: Not applicable |
DTC P0401: Monitor ID $31: Test ID $D2
| OBD Monitor ID | $31 | Test ID | $D3 | Unit and Scaling ID | $01 |
|---|
| DTC | P0400 |
| Test Description | Check for a broken EGR pipe by monitoring the A/F sensor output. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: No unit The lowest limit value: Not applicable The highest limit value: No unit |
DTC P0400: Monitor ID $31: Test ID $D3
VTC (VVT) System
| OBD Monitor ID | $35 | Test ID | $D4 | Unit and Scaling ID | $1C |
|---|
| DTC | P0011 |
| Test Description | Response check of VTC (VVT) system by monitoring divergence of actual camshaft angle from target angle. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (deg.) The lowest limit value: Output value (Decimal) x 0.01 (deg.) The highest limit value: Output value (Decimal) x 0.01 (deg.) |
DTC P0011: Monitor ID $35: Test ID $D4
| OBD Monitor ID | $35 | Test ID | $D5 | Unit and Scaling ID | $1C |
|---|
| DTC | P1009 |
| Test Description | Check of VTC (VVT) system by comparing the actual camshaft angle to the target camshaft angle. |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (deg.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.01 (deg.) |
DTC P1009: Monitor ID $35: Test ID $D5
| OBD Monitor ID | $35 | Test ID | $D6 | Unit and Scaling ID | $1C |
|---|
| DTC | P1009 |
| Test Description | Check of the VTC (VVT) system by comparing the actual camshaft angle to the target camshaft angle. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (deg.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.01 (deg.) |
DTC P1009: Monitor ID $35: Test ID $D6
| OBD Monitor ID | $35 | Test ID | $D7 | Unit and Scaling ID | $1C |
|---|
| DTC | P1009 |
| Test Description | Check of the VTC (VVT) system by comparing the actual camshaft angle to the target camshaft angle after an engine stall event. |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 (deg.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.01 (deg.) |
DTC P1009: Monitor ID $35: Test ID $D7
EVAP System
| OBD Monitor ID | $39 | Test ID | $B2 | Unit and Scaling ID | $FD |
|---|
| DTC | P0457 |
| Test Description | Loose fuel cap check or large (gross) leak check of EVAP system by monitoring the fuel tank pressure sensor signal while EVAP system is decompressing. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (kPa) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (kPa) |
DTC P0457: Monitor ID $39: Test ID $B2
| OBD Monitor ID | $3A | Test ID | $BA | Unit and Scaling ID | $12 |
|---|
| DTC | P0455 |
| Test Description | Large (gross) leak check of EVAP system by monitoring time of the fuel tank pressure sensor value which is equal atmosphere after the engine off. (EONV) |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1.0 (sec.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1.0 (sec.) |
DTC P0455: Monitor ID $3A: Test ID $BA
| OBD Monitor ID | $3C | Test ID | $B4 | Unit and Scaling ID | $06 |
|---|
| DTC | P0456 |
| Test Description | Leak check of EVAP system by monitoring the fuel tank pressure sensor value after the engine off. (EONV) |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.000305 The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.000305 |
DTC P0456: Monitor ID $3C: Test ID $B4
| OBD Monitor ID | $3C | Test ID | $B5 | Unit and Scaling ID | $83 |
|---|
| DTC | P0456 |
| Test Description | Leak check of EVAP system by monitoring the fuel tank pressure sensor value after the engine off. (EONV) |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.01 The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.01 |
DTC P0456: Monitor ID $3C: Test ID $B5
| OBD Monitor ID | $3C | Test ID | $B6 | Unit and Scaling ID | $12 |
|---|
| DTC | P0456 |
| Test Description | Leak check of EVAP system by monitoring time of the fuel tank pressure sensor value which is equal atmosphere after the engine off. (EONV) |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1.0 (sec.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1.0 (sec.) |
DTC P0456: Monitor ID $3C: Test ID $B6
| OBD Monitor ID | $3C | Test ID | $B7 | Unit and Scaling ID | $10 |
|---|
| DTC | P0456 |
| Test Description | Check of fuel tank pressure sensor signal unstable after the engine off. (early EONV) |
| Store Timing | Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1.0 (msec.) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 1.0 (msec.) |
DTC P0456: Monitor ID $3C: Test ID $B7
| OBD Monitor ID | $3C | Test ID | $B8 | Unit and Scaling ID | $FE |
|---|
| DTC | P0456 |
| Test Description | Check of EVAP system by monitoring the fuel tank pressure sensor signal after the engine off. (comparison with atmosphere) |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.25 (Pa) The lowest limit value: Output value (Decimal) x 0.25 (Pa) The highest limit value: Output value (Decimal) x 0.25 (Pa) |
| Note for MDX: Incorrect output, "The lowest limit value: Not applicable" may be indicated. In spite of failure condition, some generic scan tool may be output as normal condition. |
DTC P0456: Monitor ID $3C: Test ID $B8
| OBD Monitor ID | $3D | Test ID | $B0 | Unit and Scaling ID | $FD |
|---|
| DTC | P0496 |
| Test Description | EVAP canister purge valve "stuck open" check by monitoring fuel tank pressure sensor while the engine is running. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (kPa) The lowest limit value: Output value (Decimal) x 0.001 (kPa) The highest limit value: Not applicable |
DTC P0496: Monitor ID $3D: Test ID $B0
| OBD Monitor ID | $3D | Test ID | $B1 | Unit and Scaling ID | $FD |
|---|
| DTC | P0497 |
| Test Description | Purge flow check by monitoring fuel tank pressure sensor value when the EVAP canister purge valve is closed. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001 (kPa) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001 (kPa) |
DTC P0497: Monitor ID $3D: Test ID $B1
| OBD Monitor ID | $3D | Test ID | $B9 | Unit and Scaling ID | $30 |
|---|
| DTC | P0457, P0496, P145C |
| Test Description | Purge flow and/or EVAP canister purge valve check by monitoring fuel tank pressure sensor value while the engine is running. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.001526 (%) The lowest limit value: Not applicable The highest limit value: Output value (Decimal) x 0.001526 (%) |
DTC P0457, P0496, P145C: Monitor ID $3D: Test ID $B9
| OBD Monitor ID | $3D | Test ID | $BB | Unit and Scaling ID | $30 |
|---|
| DTC | P145A, P145D |
| Test Description | Purge flow and/or EVAP canister purge valve check by monitoring fuel tank pressure sensor value while the engine is running with positive pressure condition. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value lift: Output value (Decimal) x 0.001526 (%) The lowest limit value lift: Not applicable The highest limit value lift: Output value (Decimal) x 0.001526 (%) |
DTC P145A, P145D: Monitor ID $3D: Test ID $BB
| OBD Monitor ID | $3D | Test ID | $BC | Unit and Scaling ID | $10 |
|---|
| DTC | P145B |
| Test Description | Purge flow and/or check valve check by monitoring fuel tank pressure sensor value while the engine is running. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value lift: Output value (Decimal) x 1 (msec.) The lowest limit value lift: Output value (Decimal) x 1 (msec.) The highest limit value lift: Not applicable |
DTC P145B: Monitor ID $3D: Test ID $BC
Fuel System (Bank 1)
| OBD Monitor ID | $81 | Test ID | $D8 | Unit and Scaling ID | $05 |
|---|
| DTC | P0171, P0172 |
| Test Description | Monitoring long-term fuel trim value calculated by A/F sensor. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.0000305 The lowest limit value: Output value (Decimal) x 0.0000305 The highest limit value: Output value (Decimal) x 0.0000305 |
DTC P0171, P0172: Monitor ID $81: Test ID $D8
Fuel System (Bank 2)
| OBD Monitor ID | $82 | Test ID | $D8 | Unit and Scaling ID | $05 |
|---|
| DTC | P0174, P0175 |
| Test Description | Monitoring long-term fuel trim value calculated by A/F sensor. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 0.0000305 The lowest limit value: Output value (Decimal) x 0.0000305 The highest limit value: Output value (Decimal) x 0.0000305 |
DTC P0174, P0175: Monitor ID $82: Test ID $D8
Misfire
| OBD Monitor ID | $A2 | Test ID | $0B | Unit and Scaling ID | $24 |
|---|
| DTC | P0301 |
| Test Description | The average number of misfires detected during the last ten driving cycles for #1 cylinder. (current misfire counts) x 0.1 + (previous misfire counts average) x 0.9 |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
DTC P0301: Monitor ID $A2: Test ID $0B
| OBD Monitor ID | $A2 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0301 |
| Test Description | Misfire counters in #1 cylinder for the last 200 revolutions. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for RDX and MDX. This is not the total number of misfire for the drive cycle. |
| NOTE |
|---|
| This OBD monitor ID information is for RDX and MDX. This is not the total number of misfire for the drive cycle. |
DTC P0301: Monitor ID $A2: Test ID $0C
| OBD Monitor ID | $A2 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0301 |
| Test Description | Total misfire counters in #1 cylinder on the present drive cycle. Previous drive cycle misfire counters are indicated from ignition switch is turned to ON (II) until engine start. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for TSX, RL, and TL. |
| NOTE |
|---|
| This OBD monitor ID information is for TSX, RL, and TL. |
DTC P0301: Monitor ID $A2: Test ID $0C
| OBD Monitor ID | $A3 | Test ID | $0B | Unit and Scaling ID | $24 |
|---|
| DTC | P0302 |
| Test Description | The average number of misfires detected during the last ten driving cycles for #2 cylinder. (current misfire counts) x 0.1 + (previous misfire counts average) x 0.9 |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
DTC P0302: Monitor ID $A3: Test ID $0B
| OBD Monitor ID | $A3 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0302 |
| Test Description | Misfire counters in #2 cylinder for the last 200 revolutions. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for RDX and MDX. This is not the total number of misfire for the drive cycle. |
| NOTE |
|---|
| This OBD monitor ID information is for RDX and MDX. This is not the total number of misfire for the drive cycle. |
DTC P0302: Monitor ID $A3: Test ID $0C
| OBD Monitor ID | $A3 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0302 |
| Test Description | Total misfire counters in #2 cylinder on the present drive cycle. Previous drive cycle misfire counters are indicated from ignition switch is turned to ON (II) until engine start. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for TSX, RL, and TL. |
| NOTE |
|---|
| This OBD monitor ID information is for TSX, RL, and TL. |
DTC P0302: Monitor ID $A3: Test ID $0C
| OBD Monitor ID | $A4 | Test ID | $0B | Unit and Scaling ID | $24 |
|---|
| DTC | P0303 |
| Test Description | The average number of misfires detected during the last ten driving cycles for #3 cylinder. (current misfire counts) x 0.1 + (previous misfire counts average) x 0.9 |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
DTC P0303: Monitor ID $A4: Test ID $0B
| OBD Monitor ID | $A4 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0303 |
| Test Description | Misfire counters in #3 cylinder for the last 200 revolutions. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for RDX and MDX. This is not the total number of misfire for the drive cycle. |
| NOTE |
|---|
| This OBD monitor ID information is for RDX and MDX. This is not the total number of misfire for the drive cycle. |
DTC P0303: Monitor ID $A4: Test ID $0C
| OBD Monitor ID | $A4 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0303 |
| Test Description | Total misfire counters in #3 cylinder on the present drive cycle. Previous drive cycle misfire counters are indicated from ignition switch is turned to ON (II) until engine start. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for TSX, RL, and TL. |
| NOTE |
|---|
| This OBD monitor ID information is for TSX, RL, and TL. |
DTC P0303: Monitor ID $A4: Test ID $0B
| OBD Monitor ID | $A5 | Test ID | $0B | Unit and Scaling ID | $24 |
|---|
| DTC | P0304 |
| Test Description | The average number of misfires detected during the last ten driving cycles for #4 cylinder. (current misfire counts) x 0.1 + (previous misfire counts average) x 0.9 |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
DTC P0304: Monitor ID $A5: Test ID $0B
| OBD Monitor ID | $A5 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0304 |
| Test Description | Misfire counters in #4 cylinder for the last 200 revolutions. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for RDX and MDX. This is not the total number of misfire for the drive cycle. |
| NOTE |
|---|
| This OBD monitor ID information is for RDX and MDX. This is not the total number of misfire for the drive cycle. |
DTC P0304: Monitor ID $A5: Test ID $0C
| OBD Monitor ID | $A5 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0304 |
| Test Description | Total misfire counters in #4 cylinder on the present drive cycle. Previous drive cycle misfire counters are indicated from ignition switch is turned to ON (II) until engine start. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for TSX, RL, and TL. |
| NOTE |
|---|
| This OBD monitor ID information is for TSX, RL, and TL. |
DTC P0304: Monitor ID $A5: Test ID $0C
| OBD Monitor ID | $A6 | Test ID | $0B | Unit and Scaling ID | $24 |
|---|
| DTC | P0305 |
| Test Description | The average number of misfires detected during the last ten driving cycles for #5 cylinder. (current misfire counts) x 0.1 + (previous misfire counts average) x 0.9 |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
DTC P0305: Monitor ID $A6: Test ID $0B
| OBD Monitor ID | $A6 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0305 |
| Test Description | Misfire counters in #5 cylinder for the last 200 revolutions. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for MDX. This is not the total number of misfire for the drive cycle. |
| NOTE |
|---|
| This OBD monitor ID information is for MDX. This is not the total number of misfire for the drive cycle. |
DTC P0305: Monitor ID $A6: Test ID $0C
| OBD Monitor ID | $A6 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0305 |
| Test Description | Total misfire counters in #5 cylinder on the present drive cycle. Previous drive cycle misfire counters are indicated from ignition switch is turned to ON (II) until engine start. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for RL and TL. |
| NOTE |
|---|
| This OBD monitor ID information is for RL and TL. |
DTC P0305: Monitor ID $A6: Test ID $0C
| OBD Monitor ID | $A7 | Test ID | $0B | Unit and Scaling ID | $24 |
|---|
| DTC | P0306 |
| Test Description | The average number of misfires detected during the last ten driving cycles for #6 cylinder. (current misfire counts) x 0.1 + (previous misfire counts average) x 0.9 |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
DTC P0306: Monitor ID $A7: Test ID $0B
| OBD Monitor ID | $A7 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0306 |
| Test Description | Misfire counters in #6 cylinder for the last 200 revolutions. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for MDX. This is not the total number of misfire for the drive cycle. |
| NOTE |
|---|
| This OBD monitor ID information is for MDX. This is not the total number of misfire for the drive cycle. |
DTC P0306: Monitor ID $A7: Test ID $0C
| OBD Monitor ID | $A7 | Test ID | $0C | Unit and Scaling ID | $24 |
|---|
| DTC | P0306 |
| Test Description | Total misfire counters in #6 cylinder on the present drive cycle. Previous drive cycle misfire counters are indicated from ignition switch is turned to ON (II) until engine start. |
| Store Timing | Normal judgement/Failure judgement |
| Conversion to Engineering Units | Measured value: Output value (Decimal) x 1 (time) The lowest limit value: Not applicable The highest limit value: Not applicable |
| NOTE: This OBD monitor ID information is for RL and TL. |
| NOTE |
|---|
| This OBD monitor ID information is for RL and TL. |
DTC P0306: Monitor ID $A7: Test ID $0C
