Air Bag and Supplemental Restraint System (SRS) Component Inspection & Replacementtables

ACURA (1988-04)

WARNING

Accidental air bag deployment is possible. Personal injury may result. Avoid area near steering wheel and instrument panel even if air bags have deployed. Dual-stage air bag modules may be present that could contain an undeployed stage. When disposing of a deployed dual-stage air bag, always treat it as a "live" module. See appropriate AIR BAG RESTRAINT SYSTEMS article.

Make/Model	Year	Location	Table
Integra	1994-01	D-P	Acura-1
Legend	1991-95	D-P	Acura-1
	1988-90	DS	Acura-1
MDX	2004	D-P2, SI, HI	Acura-3
	2003	D-P2, SI	Acura-1
	2001-02	DS, PS2, SI	Acura-1
NSX	1993-04	D-P	Acura-1
	1991-92	DS	Acura-1
SLX	1996-99	D-P	Acura-2
RSX	2002-04	D-P2, SI	Acura-1
TL	2004	D-P2, SI, HI	Acura-4
TSX	2004	D-P2, SI, HI	Acura-4
Vigor	1993-94	D-P	Acura-1
	1992	DS	Acura-1
2.2CL	1997	D-P	Acura-1
2.3CL	1998-99	D-P	Acura-1
2.5TL	1995-98	D-P	Acura-1
3.0CL	1997-99	D-P	Acura-1
3.2CL	2003	D-P2, SI	Acura-1
	2001-02	DS, PS2, SI	Acura-1
3.2TL	2002-03	D-P2, SI	Acura-1
	2000-01	DS, PS2, SI	Acura-1
	1996-99	D-P	Acura-1
3.5RL	1999-04	DS, PS2, SI	Acura-1
	1996-98	D-P	Acura-1

APPLICATION - ACURA

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Deployed side air bag modules (if equipped); SRS control unit; Front impact sensors (if equipped); Side impact sensors (if equipped-on side deployed); Deployed seat belt pretensioners (if equipped); Seat belts (1)	Cable reel; Dash or impact sensors (if equipped); Seat belt anchor points; SRS control unit; SRS wiring harnesses; OPDS sensor (2) ; Passenger's weight sensor unit operation (if equipped) (3)	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
(1) Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points). (2) Occupant Position Detection System. (3) Operation must be checked after any collision or when passenger front seat components are replaced.

(1)	Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

(2)	Occupant Position Detection System.

(3)	Operation must be checked after any collision or when passenger front seat components are replaced.

Acura-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; SRS control unit; Seat belts (1)	Instrument panel braces; Instrument panel steering column reinforcement plate; Knee bolster & mounting points; Seat belt anchor points; Cable reel; Steering column; Wiring harness	If any components are damaged, they must be replaced.; DO NOT attempt wiring harness repairs. Replace harness.
(1) Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

(1)	Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

Acura-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed front air bag modules; Front impact sensors (1) ; Deployed side air bag modules (2) ; Deployed head impact air bag modules (2) ; SRS control unit; Roof trim (3) ; Center pillar upper trim, front grab handle, any related trim clips (2) >,> (3) >,> (4) ; Side impact sensors (on side deployed); Deployed seat belt pretensioners; Seat belts (5)	Cable reel; Seat belt anchor points; SRS control unit; Impact senors; SRS wiring harnesses	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
(1) Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed. (2) On side of deployment. (3) If head impact air bag has deployed. (4) If head impact air bag has deployed, replace all trim clips on that side, even if they appear undamaged. Replace trim clips on these parts: front pillar trim, center pillar trim, rear pillar trim, front grab handle and sun visor. (5) Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

(1)	Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed.

(2)	On side of deployment.

(3)	If head impact air bag has deployed.

(4)	If head impact air bag has deployed, replace all trim clips on that side, even if they appear undamaged. Replace trim clips on these parts: front pillar trim, center pillar trim, rear pillar trim, front grab handle and sun visor.

(5)	Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

Acura-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed front air bag modules; Front impact sensors (1) ; Deployed side air bag modules (2) ; Deployed head impact air bag modules (2) ; SRS control unit; Upper Instrument panel (if passenger-side air bag module deployed); Roof trim (3) ; Center pillar upper trim, front grab handle, any related trim clips (2) >,> (3) >,> (4) ; Side impact sensors (on side deployed); Deployed seat belt pretensioners; Seat belts (5)	Cable reel; Seat belt anchor points; SRS control unit; Impact senors; SRS wiring harnesses	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
(1) Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed. (2) On side of deployment. (3) If head impact air bag has deployed. (4) If head impact air bag has deployed, replace all trim clips on that side, even if they appear undamaged. Replace trim clips on these parts: front pillar trim, center pillar trim, rear pillar trim, front grab handle and sun visor. (5) Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

(1)	Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed.

(2)	On side of deployment.

(3)	If head impact air bag has deployed.

(4)	If head impact air bag has deployed, replace all trim clips on that side, even if they appear undamaged. Replace trim clips on these parts: front pillar trim, center pillar trim, rear pillar trim, front grab handle and sun visor.

(5)	Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

Acura-4

DAEWOO (1999-02)

WARNING

Make/Model	Year	Location	Table
Lanos	1999-02	D-P	Daewoo-1
Leganza	1999-02	D-P	Daewoo-1
Nubira	1999-02	D-P	Daewoo-1

APPLICATION - DAEWOO

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag wiring harness (1) ; Clockspring (1) ; Deployed seat belt pretensioners (if equipped); Sensing-diagnostic module	Instrument panel braces; Knee bolsters & mounting points; Satellite sensors (if equipped); Seat belts & mounting points; Steering column; Wiring harness	DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
(1) Replace on all models except 2001-02 Leganza. On 2001-02 Leganza, inspect and replace if damaged.

(1)	Replace on all models except 2001-02 Leganza. On 2001-02 Leganza, inspect and replace if damaged.

Daewoo-1

HONDA (1991-04)

WARNING

Make/Model	Year	Location	Table
Accord	2004	D-P2, HI, SI	Honda-4
	2003	D-P2, HI, SI	Honda-3
	2001-02	D-P2, SI	Honda-1
	2000	DS, PS2, SI	Honda-1
	1993-99	D-P	Honda-1
	1991-92	DS	Honda-1
Civic	2001-04	D-P2, SI	Honda-1
	1994-00	D-P	Honda-1
	1992-93	DS	Honda-1
Civic del Sol	1994-98	D-P	Honda-1
	1993	DS	Honda-1
CR-V	2002-04	D-P2, SI	Honda-1
	1997-01	DP	Honda-1
Element	2003-04	D-P2, SI	Honda-1
Insight	2000-04	D-P	Honda-1
Odyssey	2002-04	D-P2, SI	Honda-1
	1995-01	D-P	Honda-1
Passport	1996-02	D-P	Honda-2
	1995 1-2	D-P	Honda-2
Pilot	2003-04	D-P2, SI	Honda-1
Prelude	1994-01	D-P	Honda-1
Prelude Ex. SI 4WS	1992-93	DS	Honda-1
Prelude SI 4WS	1992-93	D-P	Honda-1
S-2000	2000-04	D-P	Honda-1

APPLICATION - HONDA

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Front impact sensors (if equipped) (1) ; Deployed side air bag modules (if equipped); SRS control unit; Side impact sensors (if equipped-on side deployed; Deployed seat belt pretensioners (if equipped); Seat belts (2)	Cable reel; Dash sensors (1991-94); Seat belt anchor points; SRS control unit; SRS wiring harnesses; OPDS sensor (3)	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
(1) Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed. (2) Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points). (3) Occupant Position Detection System (OPDS).

(1)	Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed.

(2)	Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

(3)	Occupant Position Detection System (OPDS).

Honda-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; SRS control unit; Seat belts (1)	Instrument panel braces; Instrument panel steering column reinforcement plate; Knee bolster & mounting points; Passenger-side air bag door; Seat belt anchor points; Cable reel; Steering wheel & column; Wiring harnesses	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
(1) Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

(1)	Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

Honda-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed front air bag modules; Front impact sensors () ; Deployed side air bag modules (2) ; Deployed head impact air bag modules (3) ; Roof trim (3) ; All trim clips on sun visors, front grab handles, front, center, rear & quarter trim panels (3) ; SRS control unit; Side or head impact sensors (on side deployed) (4) ; Deployed seat belt pretensioners; Seat belts (5)	Cable reel; Seat belt anchor points; SRS control unit; Impact senors; SRS wiring harnesses	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
() Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed. (2) 4-cylinder Accord-on side deployed. (3) 6-cylinder Accord-on side deployed. (4) 6-cylinder 4-door Accord is equipped with 2 head impact sensors per side. (5) Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

()	Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed.

(2)	4-cylinder Accord-on side deployed.

(3)	6-cylinder Accord-on side deployed.

(4)	6-cylinder 4-door Accord is equipped with 2 head impact sensors per side.

(5)	Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

Honda-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed front air bag modules; Front impact sensors (1) ; Deployed side air bag modules (2) ; Deployed head impact air bag modules (2) ; SRS control unit; Roof trim (3) ; Front grab handle & related trim clips (2) >,> (3) >,> (4) ; Side impact sensors (on side deployed); Deployed seat belt pretensioners; Seat belts (5)	Cable reel; Seat belt anchor points; SRS control unit; Impact senors; SRS wiring harnesses	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.
(1) Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed. (2) On side of deployment. (3) If head impact air bag has deployed. (4) If head impact air bag has deployed, replace all trim clips on that side, even if they appear undamaged. Replace trim clips on these parts: front pillar trim, center pillar trim, rear pillar trim, front grab handle and sun visor. (5) Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

(1)	Front impact sensors must be replaced if front air bags or seat belt pretensioners have deployed.

(2)	On side of deployment.

(3)	If head impact air bag has deployed.

(4)	If head impact air bag has deployed, replace all trim clips on that side, even if they appear undamaged. Replace trim clips on these parts: front pillar trim, center pillar trim, rear pillar trim, front grab handle and sun visor.

(5)	Replace seat belts if the air bags were deployed and-or they were being worn at time of collision (check for damage at seat belt anchor points).

Honda-4

HYUNDAI (1994-04)

WARNING

Make/Model	Year	Location	Table
Accent	2003-04	D-P2, SI	Hyundai-2
	2001-04	D-P, SI	Hyundai-1
	1995-00	D-P	Hyundai-1
Elantra	2004	D-P2, SI	Hyundai-2
	2002-03	D-P, SI	Hyundai-1
	1996-01	D-P	Hyundai-1
	1994-95	DS	Hyundai-1
Santa Fe	2001-04	D-P, SI	Hyundai-1
Sonata	1999-04	D-P, SI	Hyundai-1
	1995-98	D-P	Hyundai-1
Tiburon	2003-04	D-P, SI	Hyundai-1
	1997-01	D-P	Hyundai-1
XG300	2001	D-P, SI	Hyundai-1
XG350	2002-04	D-P, SI	Hyundai-1

APPLICATION - HYUNDAI

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Seat belts in use at time of collision (includes buckle); Deployed seat belt pretensioners (if equipped); SRSCM (1) ; Clockspring (2) ; Side impact sensor (3) ; SRS wiring harness (4)	Clockspring; Passenger presence detection system (if equipped); Seat belts & mounting points; SRS wiring harness; SRSCM; Steering column; Steering wheel; Side impact sensors (if equipped)	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
(1) SRSCM must be replaced following one air bag deployment or 5 seat belt pretensioner only deployments. Machine screws securing SRSCM to vehicle must also be replaced. (2) Following front air bag module deployment. (3) On deployed side. (4) Replace SRS wiring harness associated with deployed components.

(1)	SRSCM must be replaced following one air bag deployment or 5 seat belt pretensioner only deployments. Machine screws securing SRSCM to vehicle must also be replaced.

(2)	Following front air bag module deployment.

(3)	On deployed side.

(4)	Replace SRS wiring harness associated with deployed components.

Hyundai-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Seat belts in use at time of collision (includes buckle); Deployed seat belt pretensioners (if equipped); SRSCM (1) ; Clockspring (2) ; Front impact sensors (3) ; Side impact sensor (4) ; Seat track assembly (5) ; Seat track position sensor (5) ; SRS wiring harness (6)	Clockspring; Front impact sensors; Passenger presence detection system (if equipped); SRSCM; Seat belts & mounting points; Seat track & seat position sensors; Steering column; Steering wheel; SRS wiring harness; Side impact sensors (if equipped)	If any components are damaged, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
(1) SRSCM must be replaced following one air bag deployment or 5 seat belt pretensioner only deployments. Machine screws securing SRSCM to vehicle must also be replaced. (2) Following front air bag module deployment. (3) Following air bag module and-or seat belt pretensioner deployment. (4) Following side impact air bag module deployment, on side of impact (5) On deployed side. (6) Replace SRS wiring harness associated with deployed components.

(1)	SRSCM must be replaced following one air bag deployment or 5 seat belt pretensioner only deployments. Machine screws securing SRSCM to vehicle must also be replaced.

(2)	Following front air bag module deployment.

(3)	Following air bag module and-or seat belt pretensioner deployment.

(4)	Following side impact air bag module deployment, on side of impact

(5)	On deployed side.

(6)	Replace SRS wiring harness associated with deployed components.

Hyundai-2

INFINITI (1990-04)

WARNING

Make/Model	Year	Location	Table
FX35	2003-04	D-P2, HI, SI	Infiniti-4
FX45	2003-04	D-P2, HI, SI	Infiniti-4
G20	1999-02	D-P2, SI	Infiniti-1
	1993-96	D-P	Infiniti-2
G35	2003-04	D-P2, HI, SI	Infiniti-1
I30	2001	D-P2, SI	Infiniti-1
	1998-00	D-P, SI	Infiniti-1
	1997	D-P	Infiniti-1
	1996	D-P	Infiniti-2
I35	2002-04	D-P2, SI	Infiniti-1
J30	1997	D-P	Infiniti-1
	1994-96	D-P	Infiniti-2
	1993	D-P	Infiniti-3
M30	1990-92	DS	Infiniti-3
M45	2003-04	D-P2, HI, SI	Infiniti-5
Q45	2002-04	D-P2, HI, SI	Infiniti-1
	1998-01	D-P, SI	Infiniti-1
	1997	D-P	Infiniti-1
	1994-96	D-P	Infiniti-2
	1990-93	DS	Infiniti-3
QX4	2000-03	D-P, SI	Infiniti-1
	1997-99	D-P	Infiniti-1
QX56	2004	D-P2, HI, SI	Infiniti-6

APPLICATION - INFINITI

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Crash zone sensor and bracket (if equipped); Deployed side air bag module (1) >,> (2) ; Satellite sensor (1) >,> (2) ; Deployed seat belt pretensioners (3) ; Seat back assembly (4)	Air bag module(s); Control unit, diagnosis; Crash zone sensor-front sensor (if equipped); Side air bag module; Satellite sensor; Center pillar inner (1) ; Instrument panel; Seat (1) ; Seat belt pretensioners (2) ; Spiral cable; Steering wheel; Wiring harnesses; Seat belts & mounting points	Inspect all SIR components for dents, deformities or rust.; After vehicle is repaired, check AIR BAG warning light to ensure system is functioning properly.; DO NOT repair, splice or modify any SRS harness. Replace damaged section of harness.
(1) On side of impact, including inspection of seat slides and adjusters. (2) Except 1997-99 QX4. (3) Except 1996-98 I30 and 1997-99 QX4. (4) 1999-02 G20, 1999-04 Q45, 2002-04 I35, 2000-03 QX4, 2003-04 G35, if side air bag deployed.

(1)	On side of impact, including inspection of seat slides and adjusters.

(2)	Except 1997-99 QX4.

(3)	Except 1996-98 I30 and 1997-99 QX4.

(4)	1999-02 G20, 1999-04 Q45, 2002-04 I35, 2000-03 QX4, 2003-04 G35, if side air bag deployed.

Infiniti-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Deployed seat belt pretensioners	Air bag module(s); Control unit, diagnosis; Instrument panel; Seat belt pretensioners; All sensors; Spiral cable; Steering wheel; Wiring harnesses; Seat belts & mounting points	Inspect all SIR components for dents, deformities or rust.; After vehicle is repaired, check AIR BAG warning light to ensure system is functioning properly.; DO NOT repair, splice or modify any SRS harness. Replace damaged section of harness.

Infiniti-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Sensors in affected collision area	Air bag module(s); Control unit, diagnosis; All sensors; Spiral cable; Steering wheel; Wiring harnesses; Seat belts & mounting points	Inspect all SIR components for dents, deformities or rust.; After vehicle is repaired, check AIR BAG warning light to ensure system is functioning properly.; DO NOT repair, splice or modify any SRS harness. Replace damaged section of harness.

Infiniti-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules (1) ; Control unit, diagnosis; Crash zone sensor; Satellite sensor; Instrument panel (2) ; Deployed seat belt pretensioners	Air bag module(s); Control unit, diagnosis; Crash zone sensor; Headliner; Satellite sensor; Seat belt pretensioners; Seat belts & mounting points; Center pillar inner; Center pillar trim; Instrument panel; Seat and-or seat back; Spiral cable; Steering wheel; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) Replace all parts of seat back, including seat back frame, following side air bag-curtain air bag deployment. (2) Replace instrument panel following passenger-side air bag module deployment.

(1)	Replace all parts of seat back, including seat back frame, following side air bag-curtain air bag deployment.

(2)	Replace instrument panel following passenger-side air bag module deployment.

Infiniti-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules (1) ; Control unit, diagnosis; Crash zone sensor; Satellite sensor; Instrument panel; Deployed seat belt pretensioners	Air bag module(s); Control unit, diagnosis; Crash zone sensor; Headliner; Satellite sensor; Seat belt pretensioners; Seat belts & mounting points; Center pillar inner; Center pillar trim; Instrument panel assembly; Seat and-or seat back; Spiral cable; Steering wheel; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) Replace all parts of seat back, including seat back frame, following side air bag deployment.

(1)	Replace all parts of seat back, including seat back frame, following side air bag deployment.

Infiniti-5

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Crash zone sensor and bracket (1) ; Deployed side air bag module (2) , (3) ; Satellite sensor (2) ; Spiral cable (1) ; Deployed seat belt pretensioners (if equipped); Instrument panel	Air bag module(s); Center pillar inner; Center pillar trim; Control unit, diagnosis; Crash zone sensor; Headliner; Instrument panel; Occupant classification system; Satellite sensor; Seat belt pretensioners; Seat belts & mounting points; Seat and-or seat back; Side air bag module; Spiral cable; Steering wheel; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) Following deployment of frontal air bag modules. (2) On the side of impact. (3) Replace front seat back assembly following deployment of side air bag.

(1)	Following deployment of frontal air bag modules.

(2)	On the side of impact.

(3)	Replace front seat back assembly following deployment of side air bag.

Infiniti-6

ISUZU (1990-04)

WARNING

Make/Model	Year	Location	Table
Amigo	1999-00	D-P	Isuzu-2
Ascender	2003-04	D-P2, SI	Isuzu-7
Axiom	2002-04	D-P	Isuzu-6
Hombre	1996-00	D-P	Isuzu-1
Impulse	1990-92	DS	Isuzu-4
Oasis	1996-98	D-P	Isuzu-5
Rodeo	1996-04	D-P	Isuzu-2
	1995 1-2	D-P	Isuzu-2
Rodeo Sport	2001-03	D-P	Isuzu-2
Stylus	1991-93	DS	Isuzu-4
Trooper	1996-02	D-P	Isuzu-2
	1995	D-P	Isuzu-3
VehiCROSS	1999-01	D-P	Isuzu-2

APPLICATION - ISUZU

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Sensors in area of accident damage	Instrument panel braces; Instrument panel steering column reinforcement plate; Knee bolster; Seat belts & mounting points; Sensors in area of accident damage; SRS coil assembly; Steering column	Any sensor that the Diagnostic Energy Reserve Module (DERM) indicates as bad must be replaced.; If any components are damaged or bent, they must be replaced.; SRS wiring can be repaired following manufacturer's instructions.

Isuzu-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Sensing & Diagnostic Module (SDM)	Instrument panel braces; Instrument panel steering column reinforcement plate; Knee bolster & mounting points; Seat belts & mounting points; SRS coil assembly; Passenger-side air bag door (1) ; Steering column; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace harness.
(1) If equipped.

(1)	If equipped.

Isuzu-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; All sensors	SRS coil assembly; Instrument panel steering column reinforcement plate; Instrument panel braces; Knee bolsters; Seat belts & mounting points; Sensors in area of accident damage; Steering column	If any components are damaged or bent, they must be replaced.

Isuzu-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; All sensors	Arming sensor; Coil assembly; Diagnostic Energy Module (DERM); Forward sensor; Instrument panel steering column reinforcement plate; Knee pad; Passenger compartment sensor; Steering column; Wiring harness & brackets; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.

Isuzu-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Deployed seat belt pretensioners (if equipped); SRS control unit	Cable reel; Dash sensors (1991-94); Seat belts & mounting points; SRS control unit; SRS wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.; After vehicle is repaired, ensure AIR BAG warning light is functioning properly.

Isuzu-5

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Sensing & Diagnostic Module (SDM)	Air bag modules; SRS coil assembly; SRS wiring harnesses; Steering wheel; Steering column; Knee bolster & mounting points; Instrument panel steering column reinforcement plate; Instrument panel braces & mounting points; Driver & passenger seats; Seat belts & mounting points; SDM	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.

Isuzu-6

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; SRS coil assembly; Electronic Frontal Sensors (EFS) (1) ; Side Impact Sensors (SIS) (2) ; Sensing & Diagnostic Module (SDM)	Air bag modules; SRS coil assembly; SRS wiring harnesses; Steering wheel; Steering column; Knee bolster & mounting points; Instrument panel cross car beam; Instrument panel braces & mounting points; Driver & passenger seats & mounting points; Seat belts & mounting points; SDM	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring repairs. If SRS wiring or harness connectors are faulty, replace faulty wiring harness.
(1) Following frontal air bag deployment (2) Following deployment of side impact air bag module, on side of impact.

(1)	Following frontal air bag deployment

(2)	Following deployment of side impact air bag module, on side of impact.

Isuzu-7

KIA (1995-05)

WARNING

Make/Model	Year	Location	Table
Amanti	2004	D-P, HI, SI	Kia-1
Optima & Magentis (Canadian)	2001-04	D-P, SI	Kia-1
Rio	2001-05	D-P	Kia-1
Sedona	2002-04	D-P	Kia-1
Sephia	1996-01	D-P	Kia-1
	1995 1-2	D-P	Kia-1
Sorento	2003-04	D-P2, HI	Kia-1
Spectra	2005	D-P2, HI	Kia-1
	2001-04	D-P, HI	Kia-1
Sportage	1996-02	D-P, KI	Kia-1

APPLICATION - KIA

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Air bag diagnosis control unit (1) ; Deployed air bag modules; Impact bracket (2) ; Deployed seat belt pretensioners (3) ; Supplemental Restraint System Control Module (SRSCM) (4)	Air bag diagnosis control unit; Clockspring; Impact sensors & sensor mountings (5) ; Side impact sensors (3) ; Steering column; Steering wheel; Instrument panel; Wiring harness; Seat belts & mounting points; Impact bracket (2)	After repairs are completed, ensure AIR BAG warning light is functioning properly.
(1) 2001-02 Optima & Magentis (Canadian), 2002 Sedona. (2) 1998-02 Sportage. Impact bracket located between front bumper and frame mounted energy absorber. Failure to replace could allow air bags to deploy at less than 8 MPH. (3) If equipped. (4) 2004 Amanti. SRSCM must be replaced following one air bag module deployment or after 5 seat belt pretensioner deployments. (5) 1995 1-2 Sephia only.

(1)	2001-02 Optima & Magentis (Canadian), 2002 Sedona.

(2)	1998-02 Sportage. Impact bracket located between front bumper and frame mounted energy absorber. Failure to replace could allow air bags to deploy at less than 8 MPH.

(3)	If equipped.

(4)	2004 Amanti. SRSCM must be replaced following one air bag module deployment or after 5 seat belt pretensioner deployments.

(5)	1995 1-2 Sephia only.

Kia-1

LEXUS (1990-04)

WARNING

Make/Model	Year	Location	Table
ES250	1990-91	DS	Lexus-6
ES300	2002-03	D-P2, SI, HI	Lexus-7
	1998-01	D-P, SI	Lexus-3
	1997	D-P	Lexus-1
	1994-96	D-P	Lexus-4
	1992-93	DS	Lexus-5
ES330	2004	D-P2, SI, HI	Lexus-7
GS300	2001-04	D-P, SI, HI	Lexus-7
	1998-00	D-P, SI	Lexus-3
	1993-97	D-P	Lexus-4
GS430	2001-04	D-P, SI, HI	Lexus-7
GS400	1998-00	D-P, SI	Lexus-3
GX470	2003-04	D-P2, SI, HI	Lexus-7
IS300	2002-04	D-P, SI, HI	Lexus-7
	2001	D-P, SI	Lexus-3
LS400	1997-00	D-P, SI	Lexus-3
	1995-96	D-P	Lexus-1
	1993-94	D-P	Lexus-4
	1990-92	DS	Lexus-6
LS430	2004	DP2, SI, HI	Lexus-7
		KI
	2003	DP2, SI, HI	Lexus-7
	2001-02	DS, PS2	Lexus-7
		SI, HI
LX450	1996-97	D-P	Lexus-1
LX470	2003-04	DP2, SI, HI	Lexus-7
	1998-02	D-P	Lexus-2
RX300	1999-03	D-P, SI	Lexus-3
RX330	2004	DP2, SI, HI	Lexus-7
		KI
SC300	1996-00	D-P	Lexus-1
	1993-95	D-P	Lexus-4
	1992	DS	Lexus-5
SC400	1996-00	D-P	Lexus-1
	1993-95	D-P	Lexus-4
	1992	DS	Lexus-5
SC430	2002-04	DS,PS2, SI	Lexus-3

APPLICATION - LEXUS

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor assembly (control unit); Deployed seat belt pretensioners	Air bag module(s); Air bag sensor assembly; Front seat belt pretensioners; Glove box door (1) ; Instrument panel; Instrument panel reinforcement; Spiral cable; Steering wheel; Wiring harnesses & connectors; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.
(1) 1997 ES300, 1996 LS400 and 1996-09 LX450 only.

(1)	1997 ES300, 1996 LS400 and 1996-09 LX450 only.

Lexus-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor assembly (control unit); Front air bag sensors (1) ; Deployed seat belt pretensioners	Air bag module(s); Air bag sensor assembly; Front air bag sensors; Front seat belt pretensioners; Instrument panel; Instrument panel reinforcement; Spiral cable; Steering wheel; Wiring harnesses & connectors; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) Replace both front sensors.

(1)	Replace both front sensors.

Lexus-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor assembly (control unit); Front air bag sensors (if equipped) (1) ; Deployed seat belt pretensioners (2) ; Deployed side air bag module (3) ; Side air bag sensor assembly (If side air bag module deployed)	Air bag module(s); Air bag sensor assembly; Front air bag sensors (if equipped); Front seat belt pretensioners; Seat belts & mounting points; Side air bag modules; Side air bag sensor assembly; Glove box & door; Instrument panel; Instrument panel reinforcement; Spiral cable; Steering wheel; Wiring harnesses & connectors	If any components are damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) Replace both front sensors. (2) Except 1997 LS400. (3) On 1999 ES300, replace seat back assembly.

(1)	Replace both front sensors.

(2)	Except 1997 LS400.

(3)	On 1999 ES300, replace seat back assembly.

Lexus-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor assembly (control unit); Front air bag sensors; Deployed seat belt pretensioners (1)	Air bag module(s); Center air bag sensor assembly; Front air bag sensors; Front seat belt pretensioners (1) ; Glove box door (2) ; Instrument panel; Instrument panel reinforcement; Spiral cable; Steering wheel; Wiring harnesses & connectors; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; Wiring for front air bag sensors can be repaired following manufacturer's instructions.
(1) 1993-95 GS300 and 1993-94 LS400. (2) Except 1994-95 SC300 and SC400.

(1)	1993-95 GS300 and 1993-94 LS400.

(2)	Except 1994-95 SC300 and SC400.

Lexus-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor assembly (control unit); Front air bag sensors	Air bag module; Center air bag sensor assembly; Front air bag sensors; Spiral cable; Steering wheel; Wiring harnesses & connectors; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; Wiring for front air bag sensors can be repaired following manufacturer's instructions.

Lexus-5

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Front air bag sensors	Air bag module; Front air bag sensors; Center air bag sensor assembly; Spiral cable; Steering wheel; Wiring harnesses & connectors; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; Wiring for front air bag sensors can be repaired following manufacturer's instructions.

Lexus-6

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (replace both sensors); Deployed side air bag modules; Deployed head air bag modules; Deployed knee impact air bag modules (if equipped); Head-side air bag sensor (1) ; Deployed seat belt pretensioners; Rear head air bag sensor (if equipped) (2)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Front pillar garnish; Headliner; Instrument panel & reinforcement; Glove box & door; Seat belts & mounting points; Seat belt pretensioners; Seat position sensor; Seat back cover & frame; Head-side air bag sensors; Side air bag door (3) ; Spiral cable; Steering wheel; Rear head air bag sensor (if equipped); Wiring harnesses & connectors	If any components are damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) If side or head air bag module has deployed. (2) If head air bag module is deployed. (3) IS300 only.

(1)	If side or head air bag module has deployed.

(2)	If head air bag module is deployed.

(3)	IS300 only.

Lexus-7

MAZDA (1990-04)

WARNING

Make/Model	Year	Location	Table
Mazda3	2004	D-P2, SI, HI	Mazda-5
Mazda6	2003-04	D-P2, SI, HI	Mazda-5
Miata	1999-04	D-P	Mazda-3
	1995-97	D-P	Mazda-1
	1994	D-P	Mazda-2
	1990-93	DS	Mazda-2
Millenia	2001-02	D-P, SI	Mazda-4
	1999-00	D-P	Mazda-3
	1995-98	D-P	Mazda-1
MPV	2004	D-P2, SI	Mazda-4
	2000-03	D-P, SI	Mazda-4
	1996-98	D-P	Mazda-1
	1995	DS	Mazda-1
	1993-94	DS	Mazda-2
MX-3	1994-95	D-P	Mazda-2
MX-6	1995-98	D-P	Mazda-1
	1994	D-P	Mazda-2
	1993	DS	Mazda-2
Pickup	1999-04	D-P	Mazda-3
	1997-98	D-P	Mazda-2
	1995-96	DS	Mazda-2
Protege	2000-03	D-P, SI	Mazda-4
	1999	D-P	Mazda-3
	1995-98	D-P	Mazda-1
Protege5	2002-03	D-P, SI	Mazda-4
RX7	1994-95	D-P	Mazda-2
	1990-93	DS	Mazda-2
RX-8	2004	D-P2, SI, HI	Mazda-5
Tribute	2001-04	D-P, SI	Mazda-4
626	2000-02	D-P, SI	Mazda-4
	1999	D-P	Mazda-3
	1995-98	D-P	Mazda-1
	1994	D-P	Mazda-2
	1993	DS	Mazda-2
929	1992-95	D-P	Mazda-2

APPLICATION - MAZDA

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor unit	Clockspring; Impact sensors & sensors mountings; Steering column; Steering wheel; Wiring harness; Seat belts & mounting points	DO NOT attempt wiring harness repairs. Replace entire wiring harness.; Impact sensors must always be installed with arrow on sensor facing front of vehicle.

Mazda-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag diagnosis control unit	Clockspring; Impact sensors & sensors mountings; Steering column; Steering wheel; Wiring harness; Seat belts & mounting points	DO NOT attempt wiring harness repairs. Replace entire wiring harness.; Impact sensors must always be installed with arrow on sensor facing front of vehicle.

Mazda-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag diagnosis control unit; Seat belts (1) ; Deployed seat belt pretensioners (if equipped)	Clockspring; Front impact sensor (2) ; Steering column; Steering wheel; Wiring harness; Seat belts & mounting points	DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) On Pickup, all seat belt assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate correctly. Seat Belt assemblies not in use during a collision should also be inspected and replaced, if either damage or improper operation is noted. (2) 2001 Miata only.

(1)	On Pickup, all seat belt assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate correctly. Seat Belt assemblies not in use during a collision should also be inspected and replaced, if either damage or improper operation is noted.

(2)	2001 Miata only.

Mazda-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag diagnosis control unit; Side air bag sensor; Seat back frame, pad & trim (if side air bag has deployed); Deployed seat belt pretensioners (1) ; Seat belts (2)	Clockspring; Steering column; Steering wheel; Wiring harness; Seat belts & mounting points; Seat back & frame	DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) If equipped. (2) On Tribute, all seat belt assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate correctly. Seat Belt assemblies not in use during a collision should also be inspected and replaced, if either damage or improper operation is noted.

(1)	If equipped.

(2)	On Tribute, all seat belt assemblies should be replaced unless a qualified technician finds the assemblies show no damage and operate correctly. Seat Belt assemblies not in use during a collision should also be inspected and replaced, if either damage or improper operation is noted.

Mazda-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Front crash sensor (crash zone sensor); Air bag diagnosis control unit (SAS control module); Side crash sensor (side air bag sensor) (1) ; Seat back frame, pad & trim (1) ; Deployed seat belt pretensioners (2) ; Passenger seat & seat weight sensor (3)	Clockspring; Steering column; Steering wheel; Wiring harness; Seat belts & mounting points; Seat back & frame	DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) If side air bag has deployed. (2) If equipped. (3) If equipped with seat weight sensor and side and-or front air bags have deployed.

(1)	If side air bag has deployed.

(2)	If equipped.

(3)	If equipped with seat weight sensor and side and-or front air bags have deployed.

Mazda-5

MITSUBISHI (1990-04)

WARNING

Make/Model	Year	Location	Table
Diamante	1999-04	D-P	Mitsubishi-6
	1997-98	D-P	Mitsubishi-2
	1994-96	D-P	Mitsubishi-3
	1992-93	DS	Mitsubishi-3
Eclipse	2000-04	D-P, SI	Mitsubishi-1
	1996-99	D-P	Mitsubishi-2
	1995	D-P	Mitsubishi-4
Endeavor	2004	D-P2, SI	Mitsubishi-10
	2004	D-P, SI	Mitsubishi-10
Expo	1994-95	DS	Mitsubishi-2
Galant	2004	D-P2, SI	Mitsubishi-9
	1999-03	D-P, SI	Mitsubishi-1
	1997-98	D-P	Mitsubishi-2
	1994-96	D-P	Mitsubishi-3
Lancer	2002-04	D-P, SI	Mitsubishi-7
Lancer Evolution	2003-04	D-P	Mitsubishi-7
Lancer Sportback	2004	D-P, SI	Mitsubishi-7
Mirage	2000-02	D-P	Mitsubishi-6
	1997-99	D-P	Mitsubishi-2
	1995-96	D-P	Mitsubishi-5
	1994	DS	Mitsubishi-5
Montero	2002-04	D-P, SI	Mitsubishi-7
	2001	D-P, SI	Mitsubishi-3
	1996-00	D-P	Mitsubishi-3
	1994-95	DS	Mitsubishi-3
Montero Sport	1997-04	D-P	Mitsubishi-3
Outlander	2003-04	D-P, SI	Mitsubishi-8
Sigma	1990	DS	Mitsubishi-4
3000GT	1997-99	D-P	Mitsubishi-2
	1994-96	D-P	Mitsubishi-3
	1991-93	DS	Mitsubishi-3

APPLICATION - MITSUBISHI

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; SRS control unit; Side impact sensors (if side air bags deployed); Front seat back assembly (if side air bags deployed); Deployed seat belt pretensioner (1)	Air bag module(s); SRS control unit; Side impact sensors; Clockspring; Steering column & intermediate joint; Steering wheel; Front seat back assembly; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.
(1) If equipped.

(1)	If equipped.

Mitsubishi-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; SRS control unit	Air bag module(s); SRS control unit; Clockspring; Steering column & intermediate joint; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.

Mitsubishi-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Front impact sensors; SRS control unit; Side impact sensors (1) ; Front seat back assembly (2) ; Deployed seat belt pretensioners (if equipped)	Air bag module(s); SRS control unit; Front & side impact sensors (if equipped); Front seat back assembly; Clockspring; Steering column & intermediate joint; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.
(1) 2001-02 Montero only. (2) If side air bags deployed.

(1)	2001-02 Montero only.

(2)	If side air bags deployed.

Mitsubishi-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Clockspring; Front impact sensors; Steering column & intermediate joint; Steering wheel	Air bag module(s); SRS control unit; Clockspring; Front impact sensors; Steering column; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.

Mitsubishi-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; SRS control unit	Air bag module(s); SRS control unit; Clockspring; Steering column; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.

Mitsubishi-5

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; SRS control unit; Deployed seat belt pretensioners	Air bag module(s); SRS control unit; Clockspring; Steering column & intermediate joint; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.

Mitsubishi-6

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Front impact sensors (1) ; SRS control unit; Side impact sensor (2) ; Front seat back assembly (2) ; Instrument panel (3) ; Deployed seat belt pretensioners	Air bag module(s); SRS control unit; Front & side impact sensors (if equipped); Front seat back assembly; Clockspring; Steering column, shaft & intermediate joint; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.
(1) If equipped (2) On side of impact, if side air bags deployed. (3) Lancer Evolution

(1)	If equipped

(2)	On side of impact, if side air bags deployed.

(3)	Lancer Evolution

Mitsubishi-7

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Instrument panel (1) ; Front impact sensors (1) ; SRS control unit; Side impact sensor (2) ; Front seat back assembly (2) ; Deployed seat belt pretensioners	Air bag module(s); SRS control unit; Front & side impact sensors (if equipped); Front seat back assembly; Clockspring; Steering column, shaft & intermediate joint; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.
(1) Following deployment of driver-side and passenger-side air bag modules. (2) On side of impact, if side air bags deployed.

(1)	Following deployment of driver-side and passenger-side air bag modules.

(2)	On side of impact, if side air bags deployed.

Mitsubishi-8

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Instrument panel (1) ; Front impact sensors (1) ; SRS control unit; Side impact sensor (2) ; Front seat assembly (3) ; Deployed seat belt pretensioners	Air bag module(s); SRS control unit; Front & side impact sensors (if equipped); Front seat back assembly; Clockspring; Steering column, shaft & intermediate joint; Seat position sensors; Seat belt switches; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.
(1) Following deployment of driver-side and passenger-side air bag modules. (2) On side of impact, if side air bag module is deployed. (3) Replace passenger-side front seat following frontal air bag deployment. Replace appropriate front seat assembly following side impact air bag module deployment.

(1)	Following deployment of driver-side and passenger-side air bag modules.

(2)	On side of impact, if side air bag module is deployed.

(3)	Replace passenger-side front seat following frontal air bag deployment. Replace appropriate front seat assembly following side impact air bag module deployment.

Mitsubishi-9

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Instrument panel (1) ; Front impact sensors (1) ; SRS control unit; Side impact sensor (2) ; Front seat assembly (3) ; Deployed seat belt pretensioners	Air bag module(s); SRS control unit; Front & side impact sensors; Front seat back assembly; Clockspring; Steering column, shaft & intermediate joint; Seat slide sensors (4) ; Seat belt switches; Steering wheel; Seat belts & mounting points; Wiring harness	If any components are damaged or bent, they must be replaced.
(1) Following deployment of driver-side and passenger-side air bag modules. (2) On side of impact, if side air bag module is deployed. (3) Replace appropriate front seat assembly following side impact air bag module deployment. (4) On models with dual stage air bag modules.

(1)	Following deployment of driver-side and passenger-side air bag modules.

(2)	On side of impact, if side air bag module is deployed.

(3)	Replace appropriate front seat assembly following side impact air bag module deployment.

(4)	On models with dual stage air bag modules.

Mitsubishi-10

NISSAN (1989-04)

WARNING

Make/Model	Year	Location	Table
Altima	2002-04	D-P, HI, SI	Nissan-2
	2000-01	D-P, SI	Nissan-2
	1998-99	D-P	Nissan-3
	1995-97	D-P	Nissan-4
	1994	D-P	Nissan-6
	1993	DS	Nissan-6
Frontier	2003-04	D-P2	Nissan-1
	1998-04	D-P	Nissan-1
Maxima	2004	D-P2, HI, SI	Nissan-9
	2001-03	D-P2, SI	Nissan-2
	1998-00	D-P, SI	Nissan-2
	1997	D-P	Nissan-3
	1995-96	D-P	Nissan-4
	1994	D-P	Nissan-5
	1992-93	DS	Nissan-6
Murano	2003-04	D-P2, HI, SI	Nissan-8
NX Coupe	1991-93	DS	Nissan-6
Pathfinder	2003-04	D-P, HI, SI	Nissan-2
	1999-02	D-P, SI	Nissan-2
	1996-98	D-P	Nissan-5
Pathfinder Armada	2004	D-P2, HI, SI	Nissan-10
Pickup	1996-97	DS	Nissan-5
Pulsar NX	1989-90	DS	Nissan-6
Quest	2004	D-P2, HI, SI	Nissan-10
	1997-02	D-P	Nissan-3
	1996	D-P	Nissan-4
	1994-95	D-P	Nissan-6
Sentra	2000-04	D-P, SI	Nissan-2
	1997-99	D-P	Nissan-3
	1995-96	D-P	Nissan-4
	1994	DS	Nissan-5
	1993	DS	Nissan-6
Titan	2004	D-P2, HI, SI	Nissan-10
Xterra	2003-04	D-P2, HI	Nissan-7
	2000-02	D-P	Nissan-1
200SX	1997-98	D-P	Nissan-3
	1995-96	D-P	Nissan-4
240SX	1997-98	D-P	Nissan-3
	1995-96	D-P	Nissan-4
300ZX	1994-96	D-P	Nissan-4
	1991-93	DS	Nissan-6
350Z	2003-04	D-P2, HI, SI	Nissan-2

APPLICATION - NISSAN

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Deployed seat belt pretensioners (if equipped); Crash zone sensor (1)	Air bag module(s); Control unit, diagnosis; Crash zone sensor (1) ; Instrument panel; Passenger deactivation switch; Spiral cable; Steering wheel; Wiring harnesses; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) If equipped.

(1)	If equipped.

Nissan-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Crash zone sensor (1) ; Deployed side air bag module (2) >,> (3) , (4) ; Satellite sensor (1) (2) ; Instrument panel (6) ; Deployed seat belt pretensioners (if equipped)	Air bag module(s); Control unit, diagnosis; Crash zone sensor (1) ; Headliner (5) ; Side air bag module (2) ; Satellite sensor (2) ; Seat belt pretensioners; Seat belts & mounting points; Center pillar inner (2) ; Center pillar trim (2) ; Instrument panel; Seat and-or seat back (2) , (3) ; Spiral cable; Steering wheel; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) If equipped. (2) On the side of impact. (3) On Altima, Pathfinder, Sentra and 350Z, replace all parts of seat back (including seat back frame). On 2000 Maxima, inspect and replace damaged seat components (including seat adjuster and slides) using new bolts. (4) On 2001-03 Maxima, replace all parts of seat back, including frame. (5) If equipped with side curtain air bag. (6) On 350Z, if passenger-side air bag has deployed.

(1)	If equipped.

(2)	On the side of impact.

(3)	On Altima, Pathfinder, Sentra and 350Z, replace all parts of seat back (including seat back frame). On 2000 Maxima, inspect and replace damaged seat components (including seat adjuster and slides) using new bolts.

(4)	On 2001-03 Maxima, replace all parts of seat back, including frame.

(5)	If equipped with side curtain air bag.

(6)	On 350Z, if passenger-side air bag has deployed.

Nissan-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Deployed seat belt pretensioners (if equipped)	Air bag module(s); Control unit, diagnosis; Instrument panel; Spiral cable; Steering wheel; Wiring harnesses; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.

Nissan-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis	Air bag module(s); Control unit, diagnosis; All sensors (1) ; Instrument panel; Spiral cable; Steering wheel; Wiring harnesses; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) 300ZX only.

(1)	300ZX only.

Nissan-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis	Air bag module(s); Control unit, diagnosis; All sensors; Crash zone sensor; Instrument panel; Spiral cable; Steering wheel; Wiring harnesses; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
() Except Pathfinder and Pickup. () 4WD Pickup only. () Pathfinder only.

()	Except Pathfinder and Pickup.

()	4WD Pickup only.

()	Pathfinder only.

Nissan-5

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Sensors in affected collision area	Air bag module(s); Control unit, diagnosis; All sensors; Spiral cable; Steering wheel; Wiring harnesses; Seat belts & mounting points	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.

Nissan-6

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Crash zone sensor (1) ; Deployed side air bag module; Satellite sensor (2) ; Deployed seat belt pretensioners (if equipped)	Air bag module(s); Control unit, diagnosis; Crash zone sensor; Headliner; Side air bag module; Satellite sensor; Seat belt pretensioners; Seat belts & mounting points; Center pillar inner; Center pillar trim; Instrument panel; Spiral cable; Steering wheel; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) Following frontal impact. (2) Following side impact on side of impact.

(1)	Following frontal impact.

(2)	Following side impact on side of impact.

Nissan-7

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules (1) ; Control unit, diagnosis; Crash zone sensor; Instrument panel assembly (2) ; Satellite sensor (3) ; Deployed seat belt pretensioners	Air bag module(s); Control unit, diagnosis; Crash zone sensor; Headliner; Satellite sensor; Seat belt pretensioners; Seat belts & mounting points; Center pillar inner; Center pillar trim; Instrument panel assembly; Seat and-or seat back; Spiral cable; Steering wheel; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) Replace all parts of seat back, including seat back frame, following side air bag deployment. (2) Replace following passenger-side air bag module deployment. (3) On side of impact.

(1)	Replace all parts of seat back, including seat back frame, following side air bag deployment.

(2)	Replace following passenger-side air bag module deployment.

(3)	On side of impact.

Nissan-8

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Crash zone sensor (1) ; Deployed side air bag module (2) , (3) ; Satellite sensor (2) ; Spiral cable (1) ; Deployed seat belt pretensioners (if equipped)	Air bag module(s); Center pillar inner; Center pillar trim; Control unit, diagnosis; Crash zone sensor; Headliner; Instrument panel; Satellite sensor; Seat belt pretensioners; Seat belts & mounting points; Seat and-or seat back; Side air bag module; Spiral cable; Steering wheel; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) Following deployment of frontal air bag modules. (2) On the side of impact. (3) Replace front seat back assembly.

(1)	Following deployment of frontal air bag modules.

(2)	On the side of impact.

(3)	Replace front seat back assembly.

Nissan-9

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Control unit, diagnosis; Crash zone sensor and bracket (1) ; Deployed side air bag module (2) , (3) ; Satellite sensor (2) ; Spiral cable (1) ; Deployed seat belt pretensioners (if equipped); Instrument panel	Air bag module(s); Center pillar inner; Center pillar trim; Control unit, diagnosis; Crash zone sensor; Headliner; Instrument panel; Occupant classification system; Satellite sensor; Seat belt pretensioners; Seat belts & mounting points; Seat and-or seat back; Side air bag module; Spiral cable; Steering wheel; Wiring harnesses	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) Following deployment of frontal air bag modules. (2) On the side of impact. (3) Replace front seat back assembly following deployment of side air bag.

(1)	Following deployment of frontal air bag modules.

(2)	On the side of impact.

(3)	Replace front seat back assembly following deployment of side air bag.

Nissan-10

SCION (2004)

WARNING

Make/Model	Year	Location	Table
XA	2004	D-P2, SI, HI	Scion-1
XB	2004	D-P2	Scion-2

APPLICATION - SCION

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (replace both sensors); Deployed side air bag modules; Deployed head air bag modules; Head-side air bag impact sensors (1) ; Deployed seat belt pretensioner (2) ; Rear head air bag sensor (3)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Front pillar garnish; Headliner; Instrument panel & reinforcement; Seat belts & mounting points; Seat belt pretensioners; Seat back cover & frame; Head-side air bag sensors; Spiral cable; Steering wheel; Rear head air bag sensor (if equipped); Wiring harness & connectors	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) If side or head air bag modules are deployed. (2) If front air bags are deployed, replace all seat belt pretensioners. (3) If equipped and head air bag module is deployed.

(1)	If side or head air bag modules are deployed.

(2)	If front air bags are deployed, replace all seat belt pretensioners.

(3)	If equipped and head air bag module is deployed.

Scion-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (replace both sensors); Deployed seat belt pretensioner (1)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Instrument panel & reinforcement; Seat belts & mounting points; Seat belt pretensioners; Spiral cable; Steering wheel; Wiring harness & connectors	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) If front air bags are deployed, replace all seat belt pretensioners.

(1)	If front air bags are deployed, replace all seat belt pretensioners.

Scion-2

SUBARU (1992-04)

WARNING

Make/Model	Year	Location	Table
Baja	2003-04	DS, PS2, SI	Subaru-1
Forester	2003-04	DS, PS2, SI	Subaru-2
	2001-02	D-P, SI	Subaru-1
	1998-00	D-P	Subaru-1
Impreza	2004	D-P, SI	Subaru-2
	2002-03	D-P, SI	Subaru-1
	1994-01	D-P	Subaru-1
	1993	DS	Subaru-1
Legacy	2001-04	DS, PS2, SI	Subaru-1
	2000	D-P, SI	Subaru-1
	1995-99	D-P	Subaru-1
	1992-94	DS	Subaru-1
Outback	2001-04	DS, PS2,SI	Subaru-1
	2000	D-P, SI	Subaru-1
SVX	1994-97	D-P	Subaru-1
	1992-93	DS	Subaru-1

APPLICATION - SUBARU

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag control module; Front impact sensors (1) ; Side air bag sensors (1) >,> (2) ; Front seat assembly (if side air bag is deployed) (1) >,> (2) ; Deployed seat belt pretensioners (if equipped)	Air bag control module; Combination switch & clockspring; Front impact sensors; Steering column assembly; Steering wheel; Wiring harness; Seat belts & mounting points; Side air bag sensors (1)	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring repairs.
(1) If equipped. (2) On side of deployment.

(1)	If equipped.

(2)	On side of deployment.

Subaru-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag control module; Clockspring (roll connector); Front impact sensors; Side air bag sensors (on side of impact); Front seat backrest frame assembly, pad and cover (on side of deployment); Deployed seat belt pretensioners	Air bag control module; Combination switch & clockspring; Front impact sensors; Steering column assembly; Steering wheel; Wiring harness; Seat belts & mounting points; Side air bag sensors	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring repairs.

Subaru-2

SUZUKI (1995-04)

WARNING

Make/Model	Year	Location	Table
Aerio	2002-04	D-P	Suzuki-1
Esteem	1995-02	D-P	Suzuki-1
Forenza	2004	D-P2	Suzuki-2
Sidekick	1996-98	D-P	Suzuki-1
Swift	1995-01	D-P	Suzuki-1
Verona	2004	D-P2, SI	Suzuki-2
Vitara & Grand Vitara	1999-04	D-P	Suzuki-1
XL7	2004	D-P2	Suzuki-1
	2001-04	D-P	Suzuki-1
X90	1996-98	D-P	Suzuki-1

APPLICATION - SUZUKI

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Sensing & Diagnostic Module (SDM); Forward sensors (if equipped); Deployed seat belt pretensioners (if equipped)	AIR BAG warning light operation; Combination switch assembly & contact coil; Forward sensors (1) ; Instrument panel reinforcement; Knee bolsters; Seat belts & mounting points; SDM & SDM bracket; Steering column bracket; Steering column & shaft joints; Steering wheel; Wiring harness; Air bag module(s); Sensing & Diagnostic Module (SDM)	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) Swift and XL-7.

(1)	Swift and XL-7.

Suzuki-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Clockspring; Sensing & Diagnostic Module (SDM) (1) ; SIR wiring harness; Deployed seat belt pretensioners (if equipped)	AIR BAG warning light operation; Instrument panel reinforcement; Knee bolsters; Seat belts & mounting points; SDM & SDM bracket; Steering column bracket; Steering column & shaft joints; Steering wheel; SIR wiring harness; Air bag module(s); Sensing & Diagnostic Module (SDM)	If any components are damaged or bent, they must be replaced.; DO NOT attempt SRS wiring harness repairs.
(1) SDM can sustain 5 seat belt pretensioner deployments or one air bag module deployment before replacement is required

(1)	SDM can sustain 5 seat belt pretensioner deployments or one air bag module deployment before replacement is required

Suzuki-2

TOYOTA (1990-04)

WARNING

Make/Model	Year	Location	Table
Avalon	2003-04	D-P2, SI	Toyota-1
	1998-02	D-P, SI	Toyota-1
	1996-97	D-P	Toyota-3
	1995	D-P	Toyota-4
Camry	2002-04	D-P2, SI, HI	Toyota-13
	1998-01	D-P, SI	Toyota-1
	1997	D-P	Toyota-3
	1996	D-P	Toyota-5
	1994-95	D-P	Toyota-6
	1992-93	DS	Toyota-9
Celica	2000-04	D-P, SI	Toyota-1
	1998-99	D-P	Toyota-2
	1996-97	D-P	Toyota-5
	1994-95	D-P	Toyota-7
	1990-93	DS	Toyota-10
Corolla	1998-04	D-P, SI	Toyota-1
	1996-97	D-P	Toyota-3
	1994-95	D-P	Toyota-6
	1993	DS	Toyota-9
Echo	2001-04	D-P, SI	Toyota-1
	2000	D-P	Toyota-1
Land Cruiser	2003-04	D-P2, SI, HI	Toyota-14
	1998-02	D-P	Toyota-2
	1995-97	D-P	Toyota-4
Highlander	2004	D-P2, SI, HI	Toyota-13
	2001-03	D-P, SI	Toyota-1
Matrix	2003-04	D-P, SI	Toyota-1
MR2	2000-04	D-P	Toyota-12
	1994-95	D-P	Toyota-6
	1991-93	DS	Toyota-10
Paseo	1996-97	D-P	Toyota-3
	1993-95	DS	Toyota-9
Previa	1996-97	D-P	Toyota-3
	1994-95	D-P	Toyota-6
	1992-93	DS	Toyota-9
Prius	2004	D-P2, SI, HI	Toyota-13
	2001-03	D-P, SI	Toyota-1
RAV4	2004	D-P2, SI, HI	Toyota-13
	1998-03	D-P	Toyota-11
	1996-97	D-P	Toyota-3
Sequoia	2001-04	D-P, SI, HI	Toyota-13
Sienna	2001-03	D-P, SI	Toyota-1
	1998-00	D-P	Toyota-11
Solara	2004	D-P2, SI, HI	Toyota-13
	1999-03	D-P, SI	Toyota-1
Supra	1997-98	D-P	Toyota-4
	1993-96	D-P	Toyota-5
	1990-92	DS	Toyota-10
Tacoma	1998-04	D-P	Toyota-12
	1997	D-P	Toyota-4
	1995-96	DS	Toyota-9
Tercel	1998	D-P	Toyota-2
	1996-97	D-P	Toyota-3
	1995	D-P	Toyota-8
	1993-94	DS	Toyota-9
Tundra	2000-04	D-P	Toyota-12
T100	1994-98	DS	Toyota-9
4Runner	2003-04	D-P, SI, HI	Toyota-14
	1999-02	D-P	Toyota-1
	1996-98	D-P	Toyota-4

APPLICATION - TOYOTA

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (replace both sensors if equipped) (1) ; Deployed seat belt pretensioner (2) ; Deployed side air bag modules; Side air bag sensor (if equipped) (3) ; Door side air bag sensor (if equipped) (3)	Air bag module(s); Air bag sensor (control unit); Door side air bag sensors (if equipped); Front air bag sensors (if equipped); Glove box or glove box door; Instrument panel & reinforcement; Passenger-side air bag No. 1 & 2 retainers (4) ; Seat belts & mounting points (5) ; Seat belt pretensioners; Seat back cover & frame; Side air bag sensors (if equipped); Spiral cable; Steering wheel; Wiring harness & connectors	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) Except 2003 Corolla and Matrix. (2) If front air bags are deployed, replace all seat belt pretensioners. (3) If side air bag module is deployed. (4) Sienna only. (5) Replace seat belt assembly (outer belt, inner belt, bolts and nuts) if it had been in use during severe impact. The entire assembly should be replaced even if the damage is not obvious.

(1)	Except 2003 Corolla and Matrix.

(2)	If front air bags are deployed, replace all seat belt pretensioners.

(3)	If side air bag module is deployed.

(4)	Sienna only.

(5)	Replace seat belt assembly (outer belt, inner belt, bolts and nuts) if it had been in use during severe impact. The entire assembly should be replaced even if the damage is not obvious.

Toyota-1

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (if equipped) (1) ; Deployed seat belt pretensioner (2)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors (if equipped); Seat belt pretensioners; Seat belts & mounting points; Instrument panel; Instrument panel reinforcement; Glove box & glove box door (3) ; Spiral cable; Steering wheel; Wiring harness & connectors	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) Replace both front sensors. (2) If air bags are deployed, replace all seat belt pretensioners. (3) Except 1998 Tercel and 2002 Land Cruiser.

(1)	Replace both front sensors.

(2)	If air bags are deployed, replace all seat belt pretensioners.

(3)	Except 1998 Tercel and 2002 Land Cruiser.

Toyota-2

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit)	Air bag module(s); Air bag sensor (control unit); Spiral cable; Steering wheel; Instrument panel; Instrument panel reinforcement; Wiring harness & connectors; Seat belts & mounting points	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.

Toyota-3

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit)	Air bag module(s); Air bag sensor (control unit); Instrument panel; Instrument panel reinforcement; Glove box & glove box door; Steering wheel; Spiral cable; Wiring harness & connectors; Seat belts & mounting points	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.

Toyota-4

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (1)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Instrument panel; Instrument panel reinforcement; Steering wheel; Spiral cable; Wiring harness & connectors; Seat belts & mounting points	If components are in any way damaged or bent, they must be replaced.; Wiring for front air bag sensors can be repaired following manufacturer's instructions.
(1) Replace both front sensors.

(1)	Replace both front sensors.

Toyota-5

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (1)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Instrument panel; Instrument panel reinforcement; Glove box & glove box door; Steering wheel; Spiral cable; Wiring harness & connectors; Seat belts & mounting points	If components are in any way damaged or bent, they must be replaced.; Wiring for front air bag sensors can be repaired following manufacturer's instructions.
(1) Replace both front sensors.

(1)	Replace both front sensors.

Toyota-6

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (1)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Instrument panel; Center console bracket support; Steering wheel; Spiral cable; Wiring harness & connectors; Seat belts & mounting points	If components are in any way damaged or bent, they must be replaced.; Wiring for front air bag sensors can be repaired following manufacturer's instructions.
(1) Replace both front sensors.

(1)	Replace both front sensors.

Toyota-7

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit)	Air bag module(s); Air bag sensor (control unit); Instrument panel; Center console bracket support; Steering wheel; Spiral cable; Wiring harness & connectors; Seat belts & mounting points	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.

Toyota-8

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (if equipped) (1)	Air bag module; Air bag sensor (control unit); Front air bag sensors (if equipped); Steering wheel; Spiral cable; Wiring harness & connectors (2) ; Seat belts & mounting points	If components are in any way damaged or bent, they must be replaced.; Wiring for front air bag sensors can be repaired following manufacturer's instructions.
(1) Replace both front sensors. (2) On Tacoma, DO NOT attempt wiring harness repairs. Replace entire wiring harness.

(1)	Replace both front sensors.

(2)	On Tacoma, DO NOT attempt wiring harness repairs. Replace entire wiring harness.

Toyota-9

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Front air bag sensors (if equipped) (1)	Air bag module; Front air bag sensors; Steering wheel; Spiral cable; Air bag sensor (control unit) (2) ; Wiring harness & connectors; Seat belts & mounting points	If components are in any way damaged or bent, they must be replaced.; Wiring for front air bag sensors can be repaired following manufacturer's instructions.
(1) Replace both front sensors. (2) Replace if bracket or case is deformed, vinyl seal is broken, connector is damaged, or if sensor has been dropped.

(1)	Replace both front sensors.

(2)	Replace if bracket or case is deformed, vinyl seal is broken, connector is damaged, or if sensor has been dropped.

Toyota-10

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (1) ; Deployed seat belt pretensioner (2)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Seat belt pretensioners; Seat belts & mounting points (3) ; Instrument panel; Instrument panel reinforcement; Glove box & glove box door; Spiral cable; Steering wheel; Wiring harness & connectors	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) Replace both front sensors. (2) If air bags are deployed, replace all seat belt pretensioners. (3) Replace seat belt assembly (outer belt, inner belt, bolts and nuts) if it had been in use during severe impact. The entire assembly should be replaced even if the damage is not obvious.

(1)	Replace both front sensors.

(2)	If air bags are deployed, replace all seat belt pretensioners.

(3)	Replace seat belt assembly (outer belt, inner belt, bolts and nuts) if it had been in use during severe impact. The entire assembly should be replaced even if the damage is not obvious.

Toyota-11

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed driver-side air bag module; Deployed passenger-side air bag module (1) ; Air bag sensor (control unit); Front air bag sensors (if equipped) (2) ; Deployed seat belt pretensioner (if equipped) (3)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors (if equipped); Seat belt pretensioners; Seat belts & mounting points (4) ; Instrument panel; Instrument panel reinforcement; Glove box & glove box door; Spiral cable; Steering wheel; Wiring harness & connectors	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) If passenger-side air bag module cut-off switch is OFF when impact occurs, replace switch. If switch is ON when impact occurs, and air bag deployed, check switch. (2) Replace both front sensors. (3) If air bags are deployed, replace all seat belt pretensioners. (4) Replace seat belt assembly (outer belt, inner belt, bolts and nuts) if it had been in use during severe impact. The entire assembly should be replaced even if the damage is not obvious.

(1)	If passenger-side air bag module cut-off switch is OFF when impact occurs, replace switch. If switch is ON when impact occurs, and air bag deployed, check switch.

(2)	Replace both front sensors.

(3)	If air bags are deployed, replace all seat belt pretensioners.

(4)	Replace seat belt assembly (outer belt, inner belt, bolts and nuts) if it had been in use during severe impact. The entire assembly should be replaced even if the damage is not obvious.

Toyota-12

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Front air bag sensors (replace both sensors); Deployed side air bag modules; Deployed head air bag modules; Head-side air bag impact sensors (1) ; Deployed seat belt pretensioner (2) ; Rear head air bag sensor (3)	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Front pillar garnish; Headliner; Instrument panel & reinforcement; Seat belts & mounting points; Seat belt pretensioners; Seat back cover & frame; Head-side air bag sensors; Spiral cable; Steering wheel; Rear head air bag sensor (if equipped); Wiring harness & connectors	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
(1) If side or head air bag modules are deployed. (2) If front air bags are deployed, replace all seat belt pretensioners. (3) If equipped and head air bag module is deployed.

(1)	If side or head air bag modules are deployed.

(2)	If front air bags are deployed, replace all seat belt pretensioners.

(3)	If equipped and head air bag module is deployed.

Toyota-13

Replace After Deployment	Inspect & If Damaged Replace Component (Even If Air Bag Did Not Deploy)	Comments
Deployed air bag modules; Air bag sensor (control unit); Deployed side air bag modules; Deployed head air bag modules; Side air bag impact sensors () ; Deployed seat belt pretensioner	Air bag module(s); Air bag sensor (control unit); Front air bag sensors; Front pillar garnish; Headliner; Instrument panel; Side air bag impact sensors; Spiral cable; Steering wheel; Rear air bag impact sensor; Wiring harness & connectors	If components are in any way damaged or bent, they must be replaced.; DO NOT attempt wiring harness repairs. Replace entire wiring harness.
() If side or head air bag modules are deployed.

()	If side or head air bag modules are deployed.

Toyota-14

Air Bag and Supplemental Restraint System (SRS) Component Inspection & Replacementtables Acura RSX I

ACURA (1988-04)

DAEWOO (1999-02)

HONDA (1991-04)

HYUNDAI (1994-04)

INFINITI (1990-04)

ISUZU (1990-04)

KIA (1995-05)

LEXUS (1990-04)

MAZDA (1990-04)

MITSUBISHI (1990-04)

NISSAN (1989-04)

SCION (2004)

SUBARU (1992-04)

SUZUKI (1995-04)

TOYOTA (1990-04)

Login / Signup

Enter the code

You have successfully logged in!