* PLEASE READ THIS FIRST *
Placing a non-compatible vehicle on a single-axle dynamometer could result in a safety hazard to technicians and damage to vehicle. Vehicles which use All-Wheel Drive (AWD) or traction control may not be clearly marked. Use common sense and take all necessary precautions when placing any vehicle on the dynamometer. Determine between full-time 4WD and All-Wheel Drive (AWD) for testing purposes. The following tables include information related to full-time 4WD and AWD vehicles, and how to disable the traction control system (if disengageable).
| WARNING | DO NOT operate vehicle on a 2-wheel dynamometer if the DO NOT TEST column is marked. |
| Application | FWD | RWD | Part Time 4WD | Full Time 4WD | AWD | TCS/VSA | Do Not Test |
|---|
| ILX |
| 2013-14 | X | — | — | — | — | X (1) | — |
| Legend |
| 1993-95 | X | — | — | — | — | X (2) | — |
| MDX |
| 2001-02 | — | — | — | — | X | — | X |
| 2003-14 | — | — | — | X | — | X (1) | X |
| NSX |
| 1991-01 | — | X | — | — | — | X (3) | — |
| 2002-06 | — | X | — | — | — | X (2) | — |
| RDX |
| 2007-13 | — | — | — | — | X | X (1) | X |
| 2010-14 | X | — | — | — | — | X (1) | — |
| RL |
| 2006-12 | — | — | — | — | X | — | X |
| RLX |
| 2014-15 | X | — | — | — | — | X (1) | — |
| SLX |
| 1996-99 | — | — | X (4) | — | — | — | — |
| TL |
| 2004-14 | X | — | — | — | — | X (1) | — |
| 2009-14 (VIN UA8) | — | — | — | — | X | X (1) | X |
| TLX |
| 2014 | X | — | — | — | — | X (1) | — |
| 2014 | — | — | — | — | X | X (1) | X |
| TSX |
| 2004-14 | X | — | — | — | — | X (1) | — |
| ZDX |
| 2010-13 | X | — | — | — | X | X (1) | X |
| 3.2CL |
| 2001 | X | — | — | — | — | X (3) | — |
| 2002-03 | X | — | — | — | — | X (1) | — |
| 3.5RL |
| 1996-99 | X | — | — | — | — | X (1) | — |
| 2000-01 | X | — | — | — | — | X (1) | — |
| 2002-04 | X | — | — | — | — | X (1) | — |
| 3.2TL |
| 1999 | X | — | — | — | — | X (1) | — |
| 2000-01 | X | — | — | — | — | X (1) | — |
| 2002-03 | X | — | — | — | — | X (1) | — |
| (1) Turn ignition on. TCS/VSA/VSA-OFF switch located on left side of dash. Press and hold until a beep is sounded. Indicator light will illuminate when system is disabled. (2) Turn ignition on. Push TCS switch located under trip set knob. TCS indicator light will illuminate when system is disabled. (3) Start engine. Push TCS switch located in instrument panel. TCS indicator light will illuminate when system is disabled. (4) Shift transfer case to 2H. |
| (1) | Turn ignition on. TCS/VSA/VSA-OFF switch located on left side of dash. Press and hold until a beep is sounded. Indicator light will illuminate when system is disabled. |
| (2) | Turn ignition on. Push TCS switch located under trip set knob. TCS indicator light will illuminate when system is disabled. |
| (3) | Start engine. Push TCS switch located in instrument panel. TCS indicator light will illuminate when system is disabled. |
| (4) | Shift transfer case to 2H. |
