ALIGNMENT PROCEDURES
Note. Alignment procedures not available.
| Application | Specification | ||
|---|---|---|---|
| Front | |||
| Camber in Degrees | |||
| Fraction | -1/2 +/- 1 | ||
| Decimal | -.500 +/- 1.0 | ||
| Caster in Degrees | |||
| Fraction | 2 1/4 +/- 1 | ||
| Decimal | 2.250 +/- 1.0 | ||
| Toe-In in Inches | |||
| Fraction | -3/64 +/- 7/64 | ||
| Decimal | -.042 +/- .118 | ||
| Toe-In in Degrees | |||
| Fraction | -5/64 +/- 15/64 | ||
| Decimal | -.083 +/- .236 | ||
| Toe-Out in Turns | |||
| Inner | (1) | ||
| Outer | (1) | ||
| Steering Axis Inclination (SAI) | 13 1/4° | ||
| Rear | |||
| Camber in Degrees | |||
| Fraction | -3/4 +/- 1/4 | ||
| Decimal | -.750 +/- .250 | ||
| Caster in Degrees | |||
| Fraction | N/A | ||
| Decimal | N/A | ||
| Toe-In in Inches | |||
| Fraction | 5/64 +/- 5/64 | ||
| Decimal | .083 +/- .083 | ||
| Toe-In in Degrees | |||
| Fraction | 11/64 +/- 11/64 | ||
| Decimal | .166 +/- .166 | ||
| Toe-Out in Turns | |||
| Inner | N/A | ||
| Outer | N/A | ||
| Steering Axis Inclination (SAI) | N/A | ||
| (1) Information not available. | |||
| (1) | Information not available. |
WHEEL ALIGNMENT SPECIFICATIONS (INTEGRA)