Toyota Yaris II (2005-2009) w/ cold area specification Wiring diagram
This page shows the only wiring diagram for the component.w/ cold area specification, which is found in the car Toyota Yaris II (2005-2009). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram w/ cold area specification (1 of 1)
22 23 CANL CANH
BLK WIRE
BLU WIRE
BRAKE FLUID LEVEL WARNING SWITCH (ON BRAKE FLUID RESERVOIR)
BRN WIRE
COLD AREA SPECIFICATION: ENGINE IMMOBILIZER SYSTEM,
COMPUTER DATA LINES SYSTEM
DCTY
ECU-B FUSE
ENGINE CONTROL MODULE (RIGHT REAR OF ENGINE COMPT)
ENGINE OIL PRESSURE SWITCH (LEFT FRONT OF ENGINE COMPT)
ENGINE ROOM R/B (LEFT SIDE OF ENGINE COMPT)
FUEL SUCTION PUMP, GAGE ASSEMBLY
GAGE
GRN WIRE
HOT AT ALL TIMES
HOT IN ON OR START
INSTRUMENT PANEL J/B (LEFT SIDE OF DASH)
LEFT FRONT DOOR COURTESY
LEFT REAR DOOR COURTESY
LT BLU WIRE
MAIN BODY ECU (LEFT SIDE OF DASH)
MET FUSE
ORG/ WIRE
PANEL 1 FUSE
PARKING BRAKE SWITCH (ON PARKING BRAKE ASSEMBLY)
PCTY
POWER STEERING ECU (LEFT SIDE OF DASH)
RADIO RECEIVER ASSEMBLY
RED WIRE
RIGHT FRONT DOOR COURTESY
RIGHT REAR DOOR COURTESY
RRCY
SWITCH
SWITCH (IN LEFT FRONT DOOR)
SWITCH (LOWER RIGHT "B" PILLAR)
VIO WIRE
W/ COLD AREA SPECIFICATION
W/O COLD AREA SPECIFICATION
WHT WIRE
WHT/BLK WIRE
YEL WIRE
Go to component -> Instrument cluster circuit, sedan (2 of 2) -> W/ COLD AREA SPECIFICATION
