Subaru Legacy BW (2019-2024) right rear load sensor 4 Wiring diagram
This page shows the only wiring diagram for the component.right rear load sensor 4, which is found in the car Subaru Legacy BW (2019-2024). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram right rear load sensor 4 (1 of 1)
AIR BAG CONTROL MODULE
BER-
BER- DSR+
BLK WIRE
BLU WIRE
BRN WIRE
CSL-
CSR + (PINS: 21 TO 23 NOT USED PINS)
CSR-
DSL
DSR - (PINS: 32 TO 33 NOT USED PINS)
GRN WIRE
GRY WIRE
ICL-
ICR+
LEFT ADAPTIVE BELT
LEFT CURTAIN AIR BAG MODULE
LEFT FRONT LOAD SENSOR 1
LEFT FRONT SEAT BELT PRETENSIONER
LEFT LAP BELT PRETENSIONER
LEFT REAR LOAD SENSOR 3
LEFT REAR SEAT BELT PRETENSIONER
LEFT SEAT POSITION SENSOR
LEFT SIDE AIR BAG MODULE
LEFT SIDE IMPACT SENSOR (CENTER PILLAR)
LEFT SIDE IMPACT SENSOR (FRONT DOOR)
LEFT SIDE IMPACT SENSOR (REAR WHEEL HOUSE)
LSP +
LSP - (PINS: 30 TO 32 NOT USED)
LT BLU WIRE
LT GRN WIRE
NCA WIRE
OGNDR (PINS: 15 TO 18 NOT USED PINS)
OIGNR
OLINR
PFL+ PFL-
PFR
PLA
PNK WIRE
PRA
PRL
PRR-
RED WIRE
RIGHT FRONT LOAD SENSOR 2
RIGHT REAR LOAD SENSOR 4
RSP+
SFL-
SFR-
SIDE IMPACT SENSOR (UNDER THE REAR CENTER SEAT)
SSL + (PINS: 23 TO 25 NOT USED)
SSL-
SSR - (PINS: 26 TO 27 NOT USED PINS)
SSR+
SSS
STR+
TAN WIRE
VIO WIRE
WHT WIRE
WHT/BLK WIRE
YEL WIRE
YEL/BLK WIRE
YEL/GRN WIRE
YEL/RED WIRE
Go to component -> Supplemental restraints circuit (1 of 3) -> RIGHT REAR LOAD SENSOR 4
