Pontiac Bonneville IX (1991-1999) from center i/p cross-channel) Wiring diagrams
This page contains all the electrical diagrams for the component. from center i/p cross-channel), in which he is found in the car Pontiac Bonneville IX (1991-1999). You can view various wiring diagrams where this component is used, as well as go to more detailed diagrams to see the complete connection and interaction in the system. All diagrams have links to quickly jump to the corresponding section with the component for easy viewing..
Wiring diagram from center i/p cross-channel) (1 of 2)
BLK WIRE
BLK/WHT WIRE
BRK/HZRD LPS FUSE
BRN WIRE
CRUISE/ SHIFT INTERLOCK BRAKE SWITCH (ON BRAKE PEDAL SUPPORT)
DK BLU WIRE
FROM CENTER I/P CROSS-CHANNEL)
HEAD PARK LAMP SWITCH
HOT AT ALL TIMES
HOT AT ALL TIMES LEFT MAXI- FUSE BLOCK LCM/HDLP CIRCUIT BREAKER
I/P FUSE BLOCK
LAMP
LAMP CONTROL MODULE (CENTER OF DASH)
LEFT FRONT PARK/ TURN
LEFT FRONT SIDE MARKER LAMP
LEFT SIDE MARKER LAMP
LEFT TAIL/ STOP/TURN LAMP ASSEMBLY
LT BLU WIRE
OFF HEAD PARK
ORG/ WIRE
PK LPS FUSE
RED WIRE
REMOTE FUNCTION ACTUATOR MODULE (BEHIND RIGHT SIDE OF DASH)
RIGHT FRONT PARK/ TURN LAMP
RIGHT FRONT SIDE MARKER LAMP
TAIL/ STOP LAMPS
TRUNK LID LAMPS
Go to component -> Exterior lamps circuit, without adaptive lamp monitor (1 of 2) -> FROM CENTER I/P CROSS-CHANNEL)
Wiring diagram from center i/p cross-channel) (2 of 2)
BLK WIRE
BRN WIRE
CENTER HIGH MOUNTED STOP LAMP
DK BLU WIRE
DK GRN WIRE
FROM CENTER I/P CROSS-CHANNEL)
HAZARD FLASHER (BEHIND I/P, RIGHT OF STEERING COLUMN SUPPORT)
HAZARD SWITCH
HEAD UP DISPLAY CONTROL MODULE (ABOVE INSTRUMENT CLUSTER)
HOT IN RUN, BULB TEST OR START
I/P FUSE BLOCK
INSTRUMENT CLUSTER
IPC CONNECTOR)
LEFT TAIL/ STOP/TURN LAMP ASSEMBLY
LEFT TURN INDICATOR
LEFT TURN SWITCH
LICENSE LAMP
LT BLU WIRE
ORG/ WIRE
PNK WIRE
PPL
RIGHT SIDE MARKER LAMP
RIGHT TAIL/ STOP/TURN LAMP ASSEMBLY
RIGHT TURN INDICATOR
RIGHT TURN SWITCH
SIG/B-U LPS BTSI/COR FUSE
TAIL/ STOP LAMPS
TURN FLASHER (ATTACHED TO SOUND INSULATOR)
TURN LAMPS
TURN/ HAZARD SWITCH ASSEMBLY
WHT WIRE
YEL WIRE
Go to component -> Exterior lamps circuit, without adaptive lamp monitor (2 of 2) -> FROM CENTER I/P CROSS-CHANNEL)
