Nissan Rogue II (2013-2016) chassis control module (behind glove box) Wiring diagrams
This page contains all the electrical diagrams for the component. chassis control module (behind glove box), in which he is found in the car Nissan Rogue II (2013-2016). You can view various wiring diagrams where this component is used, as well as go to more detailed diagrams to see the complete connection and interaction in the system. All diagrams have links to quickly jump to the corresponding section with the component for easy viewing..
chassis control module (behind glove box) wiring diagram (1 of 2)
10 9 PNK WIRE
14 26 PNK CAN-L CAN-H WIRE
16 8 PNK CAN-L CAN-H WIRE
17 8 17 7 17 8 CAN-L CAN-H
18 17 PNK WIRE
2 1 CAN-H CAN-L PNK WIRE
2 1 PNK WIRE
2 1 W/ BOSE AUDIO W/O BOSE AUDIO
23 33 PNK CAN-L CAN-H WIRE
23 7 CAN-L CAN-H
24 12 PNK CAN-L CAN-H WIRE
28 28 27 15 5 10 12 CAN-L CAN-H
3 4 W/O LANE DEPARTURE PREVENTION SYSTEM W/ LANE DEPARTURE PREVENTION SYSTEM
31 11 CAN-L CAN-H
4 3 CAN-H CAN-L PNK WIRE
42 41 PNK WIRE
46 45 CAN-H CAN-L PNK WIRE
5 2 CAN-H CAN-L PNK WIRE
5 6 CAN L CAN H
6 7 CAN L CAN H
60 80 PNK WIRE
9 8 CAN-L CAN-H
99 100 PNK CAN-L CAN-H WIRE
A/C AUTO AMPLIFIER (BOTTOM LEFT SIDE OF HVAC UNIT)
ABS ACTUATOR, ELECTRIC UNIT (CONTROL UNIT) (RIGHT REAR OF ENGINE COMPT)
AIRBAG DIAGNOSIS SENSOR UNIT (UNDER CENTER CONSOLE)
AROUND VIEW MONITOR CONTROL UNIT
AUTOMATIC BACK DOOR CONTROL MODULE (BEHIND LEFT REAR QUARTERPANEL)
AV CONTROL UNIT
AWD CONTROL MODULE (BEHIND LEFT END OF REAR BUMPER)
BCM (BODY CONTROL MODULE) (BEHIND LEFT END OF DASH)
BCM (BODY CONTROL MODULE) (BEHIND LEFT END OF DASH) CAN-H CAN-L
BLK WIRE
BLU WIRE
CAN-L CAN-H
CHASSIS CONTROL MODULE (BEHIND GLOVE BOX)
COMBINATION METER
DATA LINK CONNECTOR (UNDER LEFT SIDE OF DASH)
DISTANCE SENSOR (BEHIND RIGHT SIDE OF FRONT GRILLE)
ECM (LEFT FRONT OF
ENGINE COMPT)
EPS CONTROL UNIT (BEHIND LEFT SIDE OF DASH)
FRONT AIR CONTROL
FUSE 30
FUSE 6
FUSE BLOCK (J/B) (LEFT END OF DASH)
HOT AT ALL TIMES
HOT IN ON OR START
PNK 40 39 WIRE
PNK WIRE
RED WIRE
RIGHT END OF DASH)
STEERING ANGLE SENSOR (ON STEERING COLUMN)
TCM (TRANSMISSION CONTROL MODULE) (LEFT REAR OF ENGINE COMPARTMENT)
UNIFIED METER CONTROL UNIT
W/ AUTO A/C
W/O AUTO A/C
WHT WIRE
YEL WIRE
Go to component -> Computer data lines circuit -> CHASSIS CONTROL MODULE (BEHIND GLOVE BOX)
chassis control module (behind glove box) wiring diagram (2 of 2)
100 99 CAN-H CAN-L PNK WIRE
14 26 PNK CAN-L CAN-H WIRE
42 41 PNK CAN-L CAN-H WIRE
5 2 PNK WIRE
80 60 PNK CAN-L CAN-H WIRE
ABS ACTUATOR, ELECTRIC UNIT (CONTROL UNIT) (RIGHT REAR OF ENGINE COMPARTMENT)
BCM (BODY CONTROL MODULE) BEHIND LEFT OF DASH)
BLK WIRE
BLU WIRE
CAN L
CAN-H
CHASSIS CONTROL MODULE (BEHIND GLOVE BOX)
COMBINATION METER
COMPUTER DATA LINES SYSTEM
ECM (LEFT FRONT OF ENGINE COMPARTMENT)
FUSE 30
FUSE BLOCK (J/B) (LEFT END OF DASH)
HOT IN ON OR START
IGN
LT BLU WIRE
PNK CAN-L CAN-H CAN-H WIRE
PNK CAN-L CAN-H WIRE
PNK CAN-L WIRE
PNK WIRE
RIGHT END OF DASH)
STEERING ANGLE SENSOR (ON STEERING COLUMN)
TCM (TRANSMISSION CONTROL MODULE) (LEFT REAR OF ENGINE COMPARTMENT)
YEL (OR WIRE
Go to component -> Electronic suspension circuit -> CHASSIS CONTROL MODULE (BEHIND GLOVE BOX)
