Nissan Pathfinder IV facelift (2016-2020) gnd rf a/l Wiring diagrams
This page contains all the electrical diagrams for the component. gnd rf a/l, in which he is found in the car Nissan Pathfinder IV facelift (2016-2020). You can view various wiring diagrams where this component is used, as well as go to more detailed diagrams to see the complete connection and interaction in the system. All diagrams have links to quickly jump to the corresponding section with the component for easy viewing..
gnd rf a/l wiring diagram (1 of 2)
A/L SIGNAL
AS DOOR SW
BACK DOOR LOCK ASSEMBLY
BACK DOOR SW
BATT BCM FUSE
BATT PWR F/L
BCM (BODY CONTROL MODULE) (BEHIND INSTRUMENT CLUSTER)
BLK WIRE
BLU WIRE
BRAKE IND
CAN L
CAN-H
COMBI SW I/P 1
COMBI SW I/P 2
COMBI SW I/P 3
COMBI SW I/P 4
COMBI SW I/P 5
COMBI SW O/P 1
COMBI SW O/P 2
COMBI SW O/P 3
COMBI SW O/P 4
COMBI SW O/P 5
COMBINATION METER
COMBINATION SWITCH (LIGHTING, TURN SIGNAL SWITCH)
COMPUTER DATA LINES SYSTEM
DISPLAY CONTROL UNIT
DOOR AJAR SWITCH
DR DOOR SW
FRONT FOG IND
FUSE 1
FUSE 13
FUSE 31
FUSE BLOCK (J/B)
FUSE, FUSIBLE LINK, RELAY BOX 1
FUSIBLE LINK O
GND 2
GND RF A/L
GRN WIRE
HIGH BEAM (BLUE) IND
HOT AT ALL TIMES
HOT W/ IGNITION RELAY-2 ENERGIZED
I/P 3
I/P 4
I/P 5
IGN USM OUT 1
IP 1
IP 2
LEFT FRONT DOOR SWITCH
LEFT REAR DOOR SWITCH
LIGHT (GREEN) IND
LT BLU WIRE
LT GRN WIRE
O/P
O/P 1
O/P 2
O/P 3
O/P 4
O/P 5
OPTICAL SENSOR
PARKING BRAKE SWITCH
PKB SIG
PNK WIRE
PWR
RED WIRE
RIGHT FRONT DOOR SWITCH
RIGHT REAR DOOR SWITCH
RL DOOR SW
RR DOOR SW
TAN WIRE
UNIFIED METER CONTROL UNIT
W/O AUTOMATIC BACK DOOR W/ AUTOMATIC BACK DOOR W/ LED HEADLAMPS
WHT WIRE
Go to component -> Headlights circuit (1 of 2) -> GND RF A/L
gnd rf a/l wiring diagram (2 of 2)
A/L SIG
BAT BCM FUSE
BAT PWR (F/L)
BCM (BODY CONTROL MODULE)
BLK WIRE
BLU WIRE
BRN BLK/ WIRE
BRN WIRE
CAN L
CAN-H HI SIDE START SW LED
COMB SW OUT 1
COMB SW OUT 2
COMB SW OUT 3
COMBI SW IN 1
COMBI SW IN 2
COMBI SW IN 3
COMBI SW IN 4
COMBI SW IN 5
COMBI SW OUT 4
COMBI SW OUT 5
COMBINATION METER
COMBINATION SWITCH (LIGHTING, TURN SIGNAL SWITCH)
COMPUTER DATA LINES SYSTEM
DIODE 3
DISPLAY CONTROL UNIT
DOWN
FUSE 1
FUSE 13
FUSE 26
FUSE 31
FUSE BLOCK (J/B)
FUSE, FUSIBLE LINK, RELAY BOX 1
FUSIBLE LINK O
GND RF A/L
GRN WIRE
HOT AT ALL TIMES
HOT IN ON OR START
ILL
ILLUMINATION
ILLUMINATION CONTROL SWITCH
INPUT 1
INPUT 2
INPUT 3 PNK INPUT 4 WIRE
INPUT 5 PNK OUTPUT 1 WIRE
LOW SIDE START SW LED
METER
MR OUTPUT
OPTICAL SENSOR (W/ AUTO LIGHT SYSTEM) (TOP RIGHT END OF DASH)
OUTPUT 2
OUTPUT 3
OUTPUT 4
OUTPUT 5
PNK WIRE
PUSH BUTTON IGNITION SWITCH
RED WIRE
RIGHT END OF DASH)
TAN WIRE
UNIFIED METER CONTROL UNIT (W/ INFORMATION DISPLAY)
WHT WIRE
YEL WIRE
Go to component -> Instrument illumination circuit (1 of 3) -> GND RF A/L
