Mazda 3 BL facelift (2011-2013) entry, push button start system) Wiring diagram
This page shows the only wiring diagram for the component.entry, push button start system), which is found in the car Mazda 3 BL facelift (2011-2013). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram entry, push button start system) (1 of 1)
2.0L 2.5L
2.0L, 2.5L, SKYACTIV-G 2.0L
2.5L/ W/ FUEL TANK PRESSURE SENSOR
A/T 5 SPEED
BLK WIRE
BLOWER RELAY
BRAKE FLUID LEVEL SENSOR, DRL RELAY (IF EQUIPPED),
C-19
CLOCK SPRING, BCM, DSC OFF SWITCH,
COIL ANTENNA (W/ ADVANCE KEYLESS ENTRY, PUSH BUTTON START SYSTEM)
EHPAS CONTROL MODULE
ELECTRIC VARIABLE VALVE TIMING RELAY (SKYACTIV-G 2.0L),
ENTRY, PUSH BUTTON START SYSTEM)
FAN SWITCH, CLIMATE CONTROL UNIT, POWER MOS FET
FUEL INJECTION RELAY (2.3L TURBO, SKYACTIV-G 2.0L),
GRY WIRE
HO2S SHIELD (2.5L), FAN CONTROL MODULE, PCM (SKYACTIV-G 2.0L)
IGNITION COILS 1, 2, 3, 4 (2.0L, SKYACTIV-G 2.0L),
J/C C-45
J/C C-45 (LEFT END OF DASH)
PCM
SAS CONTROL MODULE
SAS CONTROL MODULE, SEAT WEIGHT SENSOR CONTROL MODULE, SAS CONTROL MODULE SHIELD
SEAT WEIGHT SENSOR CONTROL MODULE, SAS CONTROL MODULE SHIELD
SKYACTIV-G 2.0L
SKYACTIV-G 2.0L- M/T
STARTER INTERLOCK SWITCH (M/T), FAN CONTROL MODULE,
STARTER INTERLOCK SWITCH (W/ ADVANCED KEYLESS
W/ ADVANCED KEYLESS ENTRY, PUSH BUTTON START SYSTEM
WINDSHIELD WIPER MOTOR, CLUTCH PEDAL POSITION SWITCH,
WINDSHIELD WIPER MOTOR, RIGHT FRONT COMBINATION LIGHT,
Go to component -> Ground distribution circuit (1 of 2) -> ENTRY, PUSH BUTTON START SYSTEM)
