Lincoln MKZ I facelift (2009-2012) accessory protocol interface Wiring diagram
This page shows the only wiring diagram for the component.accessory protocol interface, which is found in the car Lincoln MKZ I facelift (2009-2012). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram accessory protocol interface (1 of 1)
11 1 MS CAN- MS CAN+
26 25 MS CAN- MS CAN+
4 3 2 1 3 2 MS CAN- MS CAN+
7 19 MS CAN- MS CAN+
ACCESSORY PROTOCOL INTERFACE
AMBIENT LIGHTING MODULE (MKZ) (FRONT OF CENTER CONSOLE)
AUDIO CONTROL MODULE (ACM) (CENTER OF DASH)
BASE
DRIVER DOOR MODULE (FRONT OF DRIVER'S DOOR)
DRIVER SEAT MODULE (UNDER DRIVER'S SEAT)
DUAL CLIMATE CONTROLLED SEAT MODULE (DCSM) (UNDER RIGHT FRONT SEAT CUSHION)
EXCEPT BASE
EXCEPT BASE, W/O MEMORY
FRONT DISPLAY INTERFACE MODULE (FDIM) (CENTER OF DASH)
FUSION/MILAN W/O NAVIGATION MKZ FUSION/MILAN W/ NAVIGATION
GLOBAL POSITIONING SATELLITE MODULE (GPSM) (LEFT SIDE OF DASH)
GRY/ORG WIRE
HS CAN+
HVAC MODULE EMTC (CENTER OF DASH)
HVAC-DATC (CENTER OF DASH)
LEFT REAR SIDE OBSTACLE DETECTION (SOD) SENSOR (LEFT SIDE OF REAR BUMPER)
MODULE (APIM) (W/ SYNC)
MS CAN +
PARKING AID MODULE (LEFT REAR OF TRUNK)
RIGHT REAR SIDE OBSTACLE DETECTION
VIO/ORG WIRE
W/ MEMORY
W/ NAVIGATION
W/O MEMORY
W/O NAVIGATION
WHT WIRE
WHT/BLU WIRE
Go to component -> Computer data lines circuit (2 of 2) -> ACCESSORY PROTOCOL INTERFACE
