Land Rover Range Rover Evoque I facelift (2015-2018) drv belt lock wiring diagram
This page shows the only wiring diagram for the component.drv belt lock, which is found in the car Land Rover Range Rover Evoque I facelift (2015-2018). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
drv belt lock wiring diagram (1 of 1)
AJAR SW
BATTERY JUNCTION BOX
BLK WIRE
BLK/GRN WIRE
BLK/YEL WIRE
BLU/GRY WIRE
BLU/ORG WIRE
BODY CONTROL MODULE (BCM)
BRAKE PAD
BRN/BLU WIRE
CENTRAL JUNCTION BOX
COMPUTER DATA LINES SYSTEM
DOOR AJAR SWITCH
DRIVER BUCKLE SWITCH
DRIVER CENTRAL DOOR LOCKING MOTOR
DRIVER DOOR MODULE
DRIVER DR (-)
DRV BELT LOCK
FUSE 32
FUSIBLE LINK 23
GRN/ORG WIRE
GRN/PPL WIRE
GRY/BLU WIRE
HOT AT ALL TIMES
HS CAN H (PT)
HS CAN L (PT)
HS CAN-H
HS CAN-L
INSTRUMENT CLUSTER
KL 30
LATCH GND
LEFT FRONT BRAKE PAD WEAR SENSOR
MS CAN H (BO)
MS CAN L (BO)
PPL/RED WIRE
RESTRAINTS CONTROL MODULE (RCM)
RIGHT REAR BRAKE PAD WEAR SENSOR
SENS GND
SUPPLEMENTAL RESTRAINTS SYSTEM
VBATT 3
WEAR
WHT/RED WIRE
Go to component -> Seat belt warning circuit -> DRV BELT LOCK
