Land Rover Freelander I facelift (2003-2006) hot with main relay energized Wiring diagram
This page shows the only wiring diagram for the component.hot with main relay energized, which is found in the car Land Rover Freelander I facelift (2003-2006). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram hot with main relay energized (1 of 1)
ABS ECU
BLK WIRE
BLU WIRE
BLU/WHT WIRE
BRAKE PEDAL POSITION SENSOR
BRAKE PEDAL POSITION SENSOR (UNDER LEFT SIDE OF DASH, NEAR BRAKE PEDAL SUPPORT)
BRN/PNK WIRE
CRUISE CONTROL INTERFACE ECU
CRUISE CONTROL INTERFACE ECU (UNDER PASSENGER SEAT)
CRUISE CONTROL SWITCH
ELECTRONIC AUTOMATIC TRANSMISSION ECU
ELECTRONIC AUTOMATIC TRANSMISSION ECU (INSIDE E-BOX)
ENGINE COMPARTMENT FUSE BOX
ENGINE COMPARTMENT FUSE BOX (LEFT REAR OF ENGINE COMPARTMENT)
ENGINE CONTROL MODULE
ENGINE CONTROL MODULE (INSIDE E-BOX)
FUSE 4
FUSE 6
GEARBOX SOLENOID
GRN/RED WIRE
HORN RELAY
HOT AT ALL TIMES
HOT IN ON OR START
HOT WITH MAIN RELAY ENERGIZED
INSTRUMENT CLUSTER
J/C
NCA WIRE
PASSENGER COMPARTMENT FUSE BOX
PASSENGER COMPARTMENT FUSE BOX (BEHIND LEFT SIDE OF DASH)
PNK/BLK WIRE
PPL/GRN WIRE
PPL/YEL WIRE
RED/GRN WIRE
RED/ORG WIRE
RED/WHT WIRE
REMOTE CRUISE CONTROLS
ROTARY COUPLER
SET/ ACCEL
SUSPEND/ RESUME
TRANSMISSIONS SYSTEM
VEHICLE SPEED SENSOR
WHT WIRE
WHT/BLU WIRE
WHT/YEL WIRE
YEL/BLK WIRE
YEL/BRN WIRE
Go to component -> Cruise control circuit -> HOT WITH MAIN RELAY ENERGIZED
