Kia Sedona II facelift (2010-2014) park/tail lamp sw input Wiring diagram
This page shows the only wiring diagram for the component.park/tail lamp sw input, which is found in the car Kia Sedona II facelift (2010-2014). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram park/tail lamp sw input (1 of 1)
1 12 1 12 BATT GND
AUTO MANUAL
B-CAN HIGH
B-CAN LOW
BCM
BCM-FE
BCM-IF
BCM-IM
BEC-FE
BEC-FF
BEC-IF
BEC-IM
BLK WIRE
BLU WIRE
BLU/ORG WIRE
BRN WIRE
COMPUTER DATA LINES SYSTEM
DRIVER POWER OUTSIDE MIRROR PASSENGER POWER OUTSIDE MIRROR
ENG FUSE
FUSE
HAZ SW
HAZARD SW INPUT
HEAD
HOT AT ALL TIMES
HOT IN ON OR START
INSTRUMENT CLUSTER
IPM (INSTRUMENT PANEL MODULE) (BEHIND LEFT SIDE OF DASH)
IPS IPS IPS IPS
J/C JMC (CENTER OF DASH)
LEFT
LEFT FRONT TURN SIGNAL LAMP
LEFT SIDE MARKER LAMP
LEFT SIG TURN LAMP SW IN
LEFT TURN IND
LIGHT SWITCH
MEMORY FUSE
MICOM
MULTI- FUNCTION SWITCH
OFF PARK
ORG/ WIRE
PARK/TAIL LAMP SW INPUT
PARKING LAMP
PARKING LAMP TURN LAMP
PNK WIRE
RED WIRE
RIGHT
RIGHT FRONT TURN SIGNAL LAMP
RIGHT SIDE MARKER LAMP
RIGHT SIG TURN LAMP SW IN
RIGHT TURN IND
SHUNT CONNECTOR MEMORY POWER FEED TO BCM
TURN LAMP
TURN SIGNAL LAMP SWITCH
YEL WIRE
Go to component -> Exterior lamps circuit (1 of 2) -> PARK/TAIL LAMP SW INPUT
