Kia Rio I facelift (2002-2005) hot with main relay energized Wiring diagram
This page shows the only wiring diagram for the component.hot with main relay energized, which is found in the car Kia Rio I facelift (2002-2005). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
Wiring diagram hot with main relay energized (1 of 1)
B-04
BLK WIRE
BLU WIRE
BLU/RED WIRE
COMBINATION METER
COOLING FAN MOTOR (BEHIND LEFT SIDE OF RADIATOR)
COOLING FAN RELAY (IN MAIN FUSE BOX)
COOLING FUSE
DIAGNOSIS CONNECTOR (AT LEFT SIDE OF ENGINE COMPARTMENT)
ENGINE CONTROL MODULE (BEHIND LEFT KICK PANEL)
ENGINE CONTROLS SYSTEM
ENGINE COOLANT TEMPERATURE SENSOR (AT REAR OF ENGINE, ON CYLINDER HEAD)
GRN WIRE
GRN/BLK WIRE
HOT AT ALL TIMES
HOT WITH MAIN RELAY ENERGIZED
INJECT FUSE
MAIN FUSE BOX (AT LEFT REAR OF ENGINE COMPARTMENT)
ORG/ WIRE
RED WIRE
RED/BLK WIRE
SHORT CONNECTOR SC-10
W/ ABS W/O ABS
WHT WIRE
YEL WIRE
YEL/GRN WIRE
Go to component -> Cooling fan circuit -> HOT WITH MAIN RELAY ENERGIZED
