Jaguar XKR II facelift 2 (2011-2014) driver's door lock assembly wiring diagram
This page shows the only wiring diagram for the component.driver's door lock assembly, which is found in the car Jaguar XKR II facelift 2 (2011-2014). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
driver's door lock assembly wiring diagram (1 of 1)
22 1 2 LIN HS CAN + HS CAN -
3 15 MS CAN + MS CAN -
31 32 25 HS CAN + HS CAN - DR SEAT BELT SW
AJAR SW
BLK WIRE
BLK/GRN WIRE
BLU WIRE
BLU/ WHT WIRE
BRK PAD WEAR BRK PAD WEAR RTN
CAN (+)
CENTRAL JUNCTION BOX (BEHIND LEFT KICK PANEL)
COMPUTER DATA LINES SYSTEM
COUPE
CRUISE CONTROL SYSTEM
DOOR AJAR SWITCH 1 4
DRIVER DOOR SWITCH
DRIVER SAFETY BELT SWITCH
DRIVER'S DOOR LOCK ASSEMBLY
DRIVER'S DOOR MODULE (IN DRIVER'S DOOR)
FUSE 7
GRN WIRE
HOT AT ALL TIMES
IGN
INSTRUMENT CLUSTER
KEY-IN SWITCH
LATCH GND
LEFT FRONT PAD WEAR SENSOR (BEHIND LEFT FRONT FENDER LINER)
MS CAN +
NCA WIRE
OUT
PULL SWITCH
REAR PAD WEAR SENSOR (UNDER RIGHT REAR SIDE OF VEHICLE)
RED/WHT WIRE
RESTRAINTS CONTROL MODULE (UNDER REAR OF CENTER CONSOLE)
START CONTROL UNIT (UNDER CENTER CONSOLE)
SW PULL
WHT WIRE
YEL WIRE
YEL/BLK WIRE
YEL/RED WIRE
Go to component -> Key reminder & seat belt warning circuit -> DRIVER'S DOOR LOCK ASSEMBLY
