Jaguar XKR II (2006-2008) driver lumbar valve block wiring diagram
This page shows the only wiring diagram for the component.driver lumbar valve block, which is found in the car Jaguar XKR II (2006-2008). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
driver lumbar valve block wiring diagram (1 of 1)
AUTOGLIDE HALL GND TILT/SQB MTR HALL GND
BLK WIRE
BLU WIRE
BRN WIRE
BRN/GRN WIRE
COMPUTER DATA LINES SYSTEM
DEFLATE LOWER CELL
DEFLATE UPPER CELL
DRIVER BOLSTER SEAT SOLENOID
DRIVER LUMBAR PUMP
DRIVER LUMBAR VALVE BLOCK
DRIVER SEAT MODULE (UNDER DRIVER'S SEAT)
DRIVER SEAT SWITCH
DRIVER SEAT TRACK SENSOR (BEHIND DRIVER
GRN WIRE
HGT/SLIDE/EXT MTR HALL EXTEND MTR SNS LUMBAR LO 1
INFLATE
INFLATE LOWER CELL
INFLATE UPPER CELL
INLINE DIODE
LIN
LUMBAR HI 1
LUMBAR PUMP SOLENOID
MS CAN OUT POS MS CAN OUT NEG
ORG/ WIRE
PNK DEFLATE WIRE
PNK WIRE
POWER
POWER SEAT
POWER SEAT) (IN DRIVER'S
POWER SEAT) (UNDER DRIVER'S SEAT)
PUMP
RED WIRE
SEAT BACK)
SEAT BACKREST)
SOL +
WHT WIRE
WHT/BLK WIRE
WHT/BLU WIRE
WHT/RED WIRE
YEL WIRE
YEL/RED WIRE
Go to component -> Driver"s memory seat circuit (1 of 2) -> DRIVER LUMBAR VALVE BLOCK
