Hyundai Equus II facelift (2013-2016) (under driver seat) driver anchor pretensioner wiring diagram
This page shows the only wiring diagram for the component.(under driver seat) driver anchor pretensioner, which is found in the car Hyundai Equus II facelift (2013-2016). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
(under driver seat) driver anchor pretensioner wiring diagram (1 of 1)
37 38 39 40 41 42 43 44 LOW LOW LOW LOW
BLK WIRE
BLK/ORG WIRE
BLU WIRE
BLU/BLK WIRE
BLU/ORG WIRE
BRN WIRE
DRIVER PRESSURE SIDE IMPACT SENSOR (DRIVER'S DOOR)
GRN WIRE
GRN/ORG WIRE
GROUND
GRY WIRE
HIGH HIGH HIGH HIGH
HIGH HIGH LOW HIGH LOW
LEFT REAR SIDE IMPACT SENSOR (LEFT "C" PILLAR)
LOW LOW HIGH LOW HIGH HIGH HIGH HIGH HIGH
ORG/ WIRE
ORG/BLK WIRE
PASSENGER PRESSURE SIDE IMPACT SENSOR (PASSENGER'S DOOR)
PNK WIRE
RED WIRE
RED/ORG WIRE
RIGHT FRONT SIDE AIR BAG (RIGHT SIDE OF PASSENGER'S SEAT BACK)
RIGHT REAR SIDE IMPACT SENSOR (RIGHT "C" PILLAR)
SRS CONTROL MODULE (UNDER CENTER CONSOLE)
WHT WIRE
WHT/BLK WIRE
WHT/ORG WIRE
YEL WIRE
Go to component -> Air bag circuit (3 of 3) -> (UNDER DRIVER SEAT) DRIVER ANCHOR PRETENSIONER
