Hyundai Equus II facelift (2013-2016) passenger pre-safe seat belt (right "b" pillar) wiring diagram
This page shows the only wiring diagram for the component.passenger pre-safe seat belt (right "b" pillar), which is found in the car Hyundai Equus II facelift (2013-2016). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
passenger pre-safe seat belt (right "b" pillar) wiring diagram (1 of 1)
3 2 C-CAN LO C-CAN HI
3 5 C-CAN LO C-CAN HI
7 2 C-CAN HI C-CAN LO
BLK WIRE
BLU WIRE
C-CAN HI
C-CAN LO
C-CAN LO C-CAN HI
DRIVER PRE-SAFE SEAT BELT (BASE OF LEFT "B" PILLAR)
ECS CONTROL (LEFT "B" PILLAR) MODULE (LEFT SIDE OF TRUNK)
ELECTRONIC PARKING BRAKE CONTROL MODULE (FRONT OF TRUNK)
ESC 1 FUSE
FUEL PUMP CONTROL MODULE (LEFT SIDE OF TRUNK)
GRN WIRE
GRY WIRE
HOT AT ALL TIMES
HOT AT ALL TIMES E/R FUSE, RELAY BOX (LEFT SIDE OF ENGINE COMPT) ESC 2 FUSE
HOT IN ON OR START E/R JUNCTION BOX (RIGHT ESC REAR FUSE OF ENGINE COMPT)
K LINE
MULTIPURPOSE CHECK CONNECTOR
ORG/ WIRE
PASSENGER PRE-SAFE SEAT BELT (RIGHT "B" PILLAR)
PODS MODULE (UNDER FRONT PASSENGER'S SEAT)
RED WIRE
RIGHT BLIND SPOT DETECTION RADAR (RIGHT REAR CORNER OF VEHICLE)
WHT/ORG WIRE
YEL/ORG WIRE
Go to component -> Computer data lines circuit (4 of 4) -> PASSENGER PRE-SAFE SEAT BELT (RIGHT "B" PILLAR)
