Hummer H2 I facelift (2007-2009) (right kick panel) wiring diagram
This page shows the only wiring diagram for the component.(right kick panel), which is found in the car Hummer H2 I facelift (2007-2009). This component is only found in one wiring diagram on your vehicle, and you can see its details here. If necessary, you can also go to other diagrams for this system for more information..
(right kick panel) wiring diagram (1 of 1)
BLK WIRE
COOLING FAN DIODE 1
COOLING FAN DIODE 2
DK BLU WIRE
DK GRN WIRE
FAN 1 FUSE 50
FAN 2 FUSE 53
FAN CONTROL RELAY
FAN HI RELAY
FAN LO RELAY
GRN WIRE
GRY WIRE
HOT AT ALL TIMES
INSIDE AIR TEMPERATURE SENSOR (IN LEFT FRONT HEADLINER ABOVE DRIVER)
LEFT ENGINE COOLING FAN (LEFT FRONT OF ENGINE COMPT NEAR RADIATOR)
LEFT I/P JUNCTION BLOCK (LOWER LEFT SIDE OF INSTRUMENT
LT BLU WIRE
LT GRN/BLK WIRE
ORG/BLK WIRE
PANEL TO LEFT OF STEERING COLUMN)
PWR/ TRN RELAY
RIGHT ENGINE COOLING FAN (RIGHT FRONT OF ENGINE COMPT NEAR RADIATOR)
RIGHT I/P JUNCTION BLOCK (RIGHT SIDE OF I/P BEHIND END TRIM PANEL)
SIDE OF ENGINE COMPT, NEAR BATTERY)
TAN WIRE
UNDERHOOD FUSE BLOCK (AT LEFT
WHT/BLK WIRE
YEL WIRE
Go to component -> Automatic a/c circuit (3 of 3) -> (RIGHT KICK PANEL)
